|Prev||Professional Automotive Repair Technical Discussions for August 30, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2003 Dodge Ram 2500 Truck 8.0L engine VIN: 3D7KU28W63
truck came in with a no start/crank condition. Customer replaced the starter still not cranking. We got it and I put a breaker bar on the crank bolt and it did not move. pulled all the spark plugs,no hydro-lock. Oil looks ok, drained to see if any metal shavin...
|2006 Dodge Caravan SE 3.3L air conditioning VIN: 1D4GP25R76
Happy labor day. I hope someone has seen this. This could be simple but i can't figure this out. This caravan came in with no compressor operation. Come to find out fuse 18 which powers the compressor relay is blown. Has a 20amp fuse in it. It's supposed to be...
|2007 Dodge Nitro SXT 3.7L Compressor, VIN: 1D8GT28K07
This nitro is turning my hair gray faster than my kids. The first ignition cycle of the day the compressor will not turn on, It will attempt to come on 3 times then nothing. While this is happening the power comes and goes then disappears entirely. I have mu...
Fixes & Summaries for Chrysler
|2007 Chrysler Town & Country (Van) Touring 3.8L hvac VIN: 2A4GP54L47
I replaced the expansion valve again, recharged this van again and everything works the way it should, so once again just because its new does not mean good. thanks for all suggestions I will reply to each one. Enjoy this Labor day week end.