|Prev||Professional Automotive Repair Technical Discussions for August 27, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|2000 Ford F-350 Super Duty Lariat 7.3L Noise VIN: 1FTSX31F8Y
The customer complaint is on a long uphill he hears either exhaust or air "fluttering". Thought it might be wastegate related. No codes except for EBP out of range code P0476-exhaust pressure control valve range/performance. Cleaned EBP passage and sensor and ... Trouble codes: P0476 (Exhaust Pressur control valve out of range.)
|2003 Ford Explorer XLT 4.0L Programming VIN: 1FMZU73K23
Hello Group, I am trying to initialize a used ABS module on vehicle sent by another shop. My Bosch J2534 VCI works well usually. During the program process of vehicle ID it cannot find the PCM, says blank programming, and are offered a chance to enter PCM numb...
|2006 Ford Freestyle SEL 3.0L Dem Module VIN: 1FMDK05126
Had code p1889. Replaced pump same code returned. Replaced presure and temp sensor according to tsb. Same result again.the pressure is at 42.1 psi and i understand it should be at 55 psi (+- 11 psi). Any answers??
|2008 Ford F-550 Super Duty XL 6.4L Reverse VIN: 1FDAF57R58
We usually wouldn't work on a tranmission problem but this is our own fleet vehicle and the soonest we could get it into a dealer is at least a week. The transmission has a delay and seems to be slipping in reverse only. The fluid level and condition is good. ...
|2008 Ford Escape Hybrid 2.3L Suspension VIN: 1FMCU49H98
Hope anyone can help?? Vehicle has a pop/click type noise when braking at the end of a stop and also from the start of accelleration. Noise seems to be from both sides of the front of the vehicle. THANKS for your TIME!!!
Fixes & Summaries for Ford
|1988 Ford F-350 XL 7.5L Hesitation, Surge, Stall VIN: 1FDKF37G1J
After unplugging MAP sensor with 5.8L PCM no help, installed reman unit back in truck with MAP unplugged run great. Replaced MAP and customer is happy. Didn't understand, had already tried known good MAP with no help earlier. Just one of those things. Thanks f...
|2000 Ford Expedition XLT 5.4L Surge, Cuts out, Stumble VIN: 1FMRU15L6Y
im sorry to say that my problem still exists. all post although good were not related to my issue. i will continue looking for my problem and let you know.
|2006 Ford F-150 XLT 5.4L MIL Lamp on VIN: 1FTPW14V86
This one turned out to be a rather easy fix. The left cam phaser trigger wheel was slightly bent. I assume it was that way out of the box. I did not drop it, pry against it, or anything of that matter. Ford was kind enough to warranty it for me and the tru... Trouble codes: P0345 (Cam shaft position sensor A circuit bank 2), P0349 (Cam shaft position sensor A circuit intermittent bank 2).
|2008 Ford F-350 Super Duty XL 6.8L Starter VIN: 1FDWF35Y08
Ok,this truck has a hydralic bail bed. We took the adapter to the front of the crank pulley for the bail bed off to see how it acted. Problem went away. We know that is the problem not sure if we are going to leave off or contact manufacture of the bail bed to...