|Prev||Professional Automotive Repair Technical Discussions for August 20, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2003 Dodge Caravan SE 2.4L Poor Idle Quality, Surge VIN: 1D4GP25B93
vehicle came into shop in need of timing belt with no running issues.timing belt was installed and immediately started to surge and got 2 codes -p0442,p0456. rechecked the timing and it seemed to be off one tooth .timing belt was redone and we are under the im...
|2004 Dodge Durango Limited 5.7L Poor Idle Quality, Misfire VIN: 1D4HB58D94
This vehicle had rough running problem before we ever touched it, customer states the dealer told him that you can not run platinum plugs in this engine??? Has anyone ever heard of this and if so why? From what little I have checked so far cylinders 1,3,5,&7 a... Trouble codes: P0132 (voltage high on sensor 1 bank 1), P0300 (random misfire cyl 1 3 . 5 7)
Fixes & Summaries for Chrysler
|2001 Chrysler PT Cruiser 2.4L limp mode VIN: 3C8FY4BB01
I'm going to go ahead and close this out. We installed a known good tcm into this vehicle and still had the same problem. I think we can say with certainty that there are some wires crossed up where they spliced the harness on the drivers front of the vehicle...
|2008 Chrysler 300 (Car) Touring 3.5L No Start VIN: 2C3KA53G18
I would like to thank everyone that responded. as stated before when the no bus message would appear and had no communication with any modules. the fix on this vehicle was the power distribution module. after replacing vehicle would restart every time Trouble codes: U0141 (lost communication with FCM), U0121 (lost com with anti lock brake module), U0100 (lost com with ECM), U1197 (security seed response not reveived from pcm).
|2000 Dodge Ram 1500 Truck ST 5.9L Stall, MIL Lamp on VIN: 3B7HC13ZXY
We are having issues with re-manufactured computers. Seems like you have to get 2 or 3 to get one that works properly - especially dodge pickups. The last one i put in runs the engine fine. So i guess it is just the nature of the beast.
|2008 Dodge Ram 5500 Medium Duty SLT 6.7L MIL Lamp on, U140d VIN: 3D6WC78A78
This vehicle still has the fault but its an over the road truck and intermittent on trips. We cannot duplicate!! Since this post it stopped at two other dealers and they said it was the pedal position sensor at one and a TPS at the other. They did not want to ... Trouble codes: U140D.