|Prev||Professional Automotive Repair Technical Discussions for August 6, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|2008 Ford E-450 Super Duty 6.0L No Start, Stall VIN: 1FD4E45P18
This is a small bus conversion. I recently replaced a fuel injector and it ran fine for a while, eventually stopping on the road and getting towed back. It wont crank because the PCM isn't grounding the starter relay. When I crank by jumping, it won't start. S... Trouble codes: P0705
|2008 Ford F-150 XLT 5.4L left turn signal for trailer VIN: 1FTVX12538
have checked circuit from fuse block to frame connector and frame connector to rear harness connector. vehicle has brand new trailer harness and 4 way combo 7 way connector. all ford parts. yellow wire from fuse bock to trailer connector good. still no power t...
|2009 Ford Flex SEL 3.5L cooling fan VIN: 2FMDK52C19
This Ford Flex has a cooling problem that only happens when sitting in traffic. The radiator fan does not come with the A/C or when the engine gets hot. I see a large modual between the fans and the conector to it has power. How do you check that modual to ver...
|2001 Mercury Sable GS 3.0L wont pass emissions VIN: 1MEHM55S11
customer brought the car in for us for emissions test and the evap and egr monitors was not set they drove it for another week and still not set. we rest computer and started resting the monitors and still will not reset so the question is what is required ...
Fixes & Summaries for Ford
|1998 Ford Explorer Eddie Bauer 4.0L No Start VIN: 1FMZU32E3W
Thanks guys for your imput and quick responce. I know how busy we all are and I appreciate the time members take to help fellow techs. Fuse #19 in the instument panel feeds the diode. That fuse was missing. Installed fuse. Vehicle starts and runs.