|Prev||Professional Automotive Repair Technical Discussions for July 19, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|2001 Ford F-250 Super Duty Lariat 6.8L radiator VIN: 1FTNX21S51
vehicle came in with radiator leak ,flushed system and replace radiator 5 months later vehicle came back with rad core hole in the center ,flushed cooling sytem , replaced radiator again,replaced battery neg cable and checked battery pos&neg for voltage spikes...
|2002 Ford Taurus LX 3.0L trans shifting VIN: 1FAFP55262
One for you FOMOCO dealer guys. Got this '02 Taurus that had the pcm replaced because the cooling fans weren't coming on. I was asked to program the security with my IDS.The pcm no longer available from dealer so aftermarket was used.After programming, the car...
|2007 Ford Escape XLT 3.0L Unknown VIN: 1FMCU93177
Hi, dont want to sound dumb here, I have an 07 Escape. The a/c compressor short cycles. It seems to run for about 5 seconds and shuts off for about 10-15 seconds before it runs again for a short priod. I believe someone at autozone tried to charge it with do-i...
|2001 Mercury Sable GS 3.0L master cyl VIN: 1MEHM59S41
the brakes will apply without ever hitting the pedle and will hold for about 1 hr
Fixes & Summaries for Ford
|1999 Ford F-150 Lariat 4.6L Cuts out, MIL Lamp on VIN: 2FTRF17W9X
After inspecting the wiring harness closer I found that the cam signal wire to the pcm was rubbing on the back of the engine and grounding out intermittently. I repaired the wiring and rerouted the harness and the cam signal has not dropped out and the engine ... Trouble codes: P00, 340 (camshaft position sensor looses signal to pcm).
|2004 Ford F-150 Heritage XL 4.6L Stall VIN: 2FTRF18W14
After removal and disassembly we discovered a failing torque converter but also a large amount of metal debris in the valve body. We installed a Jasper remanufactured transmission to correct the problem. Thank you everyone for your help! Trouble codes: P1728.