|Prev||Professional Automotive Repair Technical Discussions for July 17, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2001 Dodge Ram 2500 Truck 5.9L No Start, Stall VIN: 1B7KF236X1
vehicle stalled and wont restart. Found air in system, bleed system and it started and ran, test drive it died. Noticed transfer pump not running. let sit for about 10 minutes and transfer pump started running again. Code p1689 was set. Again test drive to ver... Trouble codes: P1689
|2006 Dodge Sprinter 2500 2.7L Cuts out VIN: WD0BD64456
This 2.7L diesel 2500 Sprinter has a lack of power, black smoke. Two code P2511 EGR P2359 Turbo boost. Pin test in Mitchell is unclear. We removed the EGR and cleaned some corrosion inside the valve all appears ok. Cleared codes and it ran great shut if off tw... Trouble codes: P2511, P2359 (Turbo)
|2009 Jeep Grand Cherokee Overland 5.7L Instrument Cluster VIN: 1J8HR68T89
hello everyone,I am a euro guy working on my dentist's,grand Cherokee,so I am a little unfamiliar here and could use some help.He says they bwere going down the highway and the instrument cluster shut off.lost most lights and indicators.I scanned whole car and...
Fixes & Summaries for Chrysler
|2008 Chrysler Town & Country (Van) Touring 3.8L abs VIN: 2A8HR54P28
Thanks Y'all for the help. BINGO the Steering angle sensor in the clock spring was bad. That caused the trac control to apply the front brakes to prevent roll-over. Great job Chrysler... any way the SAS signal is normal now and everybody is HAPPY HAPPY HAPPY...