Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for June 14, 2013
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1999 Chrysler 300M 3.5L headgasket VIN: 2C3HE66G2X
Hi all, have this 3.5L chrysler here. Doing a engine analysis found that while driving the MODIS shows the ECT pid stays around 220 degrees. Get back to the shop and find the cooling fans are on and the radiator is not dissipating heat. Suspected a stuck or st...
2003 Chrysler PT Cruiser Touring 2.4L beeping VIN: 3C4FY58B93
Have you seen this before? Beeping sound coming from passengers side glove box. Once and hour. Like clock work. No lights , no codes coming on. Oh what to do?
2005 Chrysler 300 (Car) C 5.7L Shift interlock, Parktronic system VIN: 2C3AA63H75
Vehicle was towed in with most of an engine swap done. I was told engine had seized up just out of warranty and previous shop was closest to location of the breakdown. These problems are all post engine swap. When vehicle came in, I found engine harness crushe...
2006 Dodge Sprinter 2500 2.7L radio & blower VIN: WD0PD64426
Ok I have an 06 sprinter 2500 cargo base customer complaint was radio and blower motor intermittanlt stop working. Verifying the problem i noted that the blower motor and radio work fine until the engine is started about 5 seconds after starting it the radio s...
2009 Dodge Ram 1500 Truck Sport 5.7L Controller VIN: 1D3HV18T99
Hello Dodge guys. I believe that this will be an easy one for someone in the dealership. I would really appreciate the help om this one. Customer (friend) states A/C quits working as well as automatic lights. He disconnects battery then it all works again for ...
1996 Jeep Grand Cherokee Limited 4.0L Misfire VIN: 1J4GZ78S8T
Hello Techs. This jeep was towed in as a no start. I replaced crank sensor with a napa brand. cs611 was part number. Jeep then fired up but I could not drive it would stall as soon as put in gear. We then checked spark plugs and they had a gap of .90 and they ... Trouble codes: P1391
2011 Ram 3500 Laramie 6.7L Hydroboost Unit VIN: 3D73Y3HL6B
Thanks in advance. This truck came in with a hissing noise simular to a vacume leak in the brake booster area. The brake booster is not a vacumme unit it is a hydralic booster. The hissing noise goes away when you apply the brake or turn the steering wheel. We...

Fixes & Summaries for Chrysler
Fix/Summary Answers
1965 Chrysler 300 (Car) 6.3L brakes VIN: C253137984
Thank You to AL [...] the replies. They were all good ideas. I believe we had more than 1 problem. We turned all drums, removed self adjusters, ground the edges of all brake shoes and readjusted. That seemed to stop rear brake grab, but it was still way to sensitiv...
1999 Dodge Ram 3500 Van 5.2L return to center VIN: 2B7KB31Y0X
Thanks for all replies, William from Alabama nailed it the new mevotec ball joints were binding when loaded, they were free when wheels are off the ground the moog ones are perfect,(twice the money) steering comes right back to center. just a note the frame r...
2005 Dodge Dakota SLT 4.7L temp warning indicator VIN: 1D7HW48N85
We decided to replace the wire from the transmission to the PCM for the temp sensor signal voltage. The factory wiring diagram called out a yellow/pink wire however the wire was actually yellow/blue. Road tested several miles and no symptom. Will return v...
2005 Dodge Dakota SLT 4.7L Poor Idle Quality, Misfire VIN: 1D7HW42N85
Thanks for all the help. The final fix was to drop the exhast and drive it idle ok power good. Replaced the cats and all is well. Thanks again. Vince
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next