|Prev||Professional Automotive Repair Technical Discussions for June 13, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|2007 Honda Civic DX 1.8L refrigeration VIN: 2HGFA16347
The ac on this vehicle is intermittently working, every time we have it it's working ,so much for checking the power to the clutch, etc...customer said when it cuts out the fans are working but the compressor is not coming on. Our customer is dependable as it ...
|2007 Honda Fit Sport 1.5L door locks VIN: JHMGD37677
Hi all, 2007 Honda Fit Sport; Customer has had this problem for years now and no one, including the local Honda dealer, seems to know what the problem could be.. Only when the key is left in the ignition, when the driver door is closed, all the doors will u...
|2004 Mitsubishi Diamante ES 3.5L alarm VIN: 6MMAP57P04
This vehicle has an alarm with a mind of it's own, it just comes on for no reason and stops after a few minutes, may do it 2-3 times in the day. No codes in system but has no available data for alarm system, this is a factory alarm. Really need some info on di...
|1991 Nissan 300ZX 2 2 3.0L Upper Intake VIN: JN1RZ26H0M
Hey Gang, I have this old 91 Nissan 300zx 2+2 non turbo and I have to do all 6 injectors. I'm having a heck of a time getting the upper intake manifold off. I've never done one of these. Can you put me in the right direction of the best way to get this off. Ob...
|2000 Nissan Altima GLE 2.4L steering VIN: 1N4DL01D1Y
My customer brought in his Altima with a noise concern. I found that there is a loud vibrating/rattle noise coming from the power steering pressure hose that comes right off his p/s pump. It is more noticable in gear(automatic) with a slight elevated idle. Whe...
Fixes & Summaries for Asian
|2002 Honda Accord EX 2.3L Poor Idle Quality VIN: 1HGCG55642
thanks everyone for taking the time to respond.first i blocked off egr valve and idle problem was still there. i ended up resetting the base idle to where it was supposed to be . then just for giggles i removed the throttle body and the iac motor.i have never... Trouble codes: P1491.
|1997 Lexus ES300 3.0L Rear Suspension VIN: JT8BF22G6V
Well, customer needed car and so we had to give it back without a fix. I am still at a loss as to what the cause was. I tried everything that was suggested several times and short of changing every part in rear end, nothing helped. Sorry I can't be of more hel...
|2008 Subaru Legacy 2.5i 2.5L Ecm VIN: 4S4BP60C28
Thanks for the replies everyone.I am going to close this tech question for now.The customer decided he did not have faith in the car since water intrusion and it not starting up to this point.He has surrendered the car to me.I will continue to try and figure o...
|2005 Toyota Camry 2.4L Parking lock VIN: 4T1BE30KX5
Thanks for all your help. Drop the pan and valve body and found the culprit. The pushing rod tip was bend causing the cone to binding and cannot slide all the way to push up the parking pawl for locking the gear. After straighten the tip, the cone slide all th...
|2005 Toyota Camry 2.4L Mechanical VIN: 4T1BE30KX5
Yes, after dropping the pan and valve body,I saw the push rod tip was bent, causing the sliding cone to bind and not touching the parking pawl level for locking the gear. Straighten the tip and all works well like it suppose to be. Appreciated to all of you f...