|Prev||Professional Automotive Repair Technical Discussions for June 12, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|2004 Ford F-150 FX4 5.4L Poor Idle Quality, Hesitation, Stall, MIL Lamp on VIN: 1FTPW14594
Im suspecting the pcm is going bad or needs an update. Has anyone ever tried to update the computer and not given the option with the ids? I dont have any communication issues or anything like that it just wont give me the option to update whenever i click mod... Trouble codes: P2107
|2005 Ford E-350 Super Duty 5.4L No Start VIN: 1FTSS34L85
fuel pump will run when ground return at fpdm and start vehicle. tried new fpdm 17-50 ohms at control wire. Trouble codes: 191 (low fuel pressure)
|2006 Ford F-150 XLT 5.4L No Start VIN: 1FTPW12556
Truck has 187k miles came in with cylinder 7 misfire one of the rocker arm pop out and damage the cam shaft.the cylinder heads were replace. The mechanic disconnected the battery remove the computer from the vehicle.after a week or so the mechanic finish putti...
|2010 Ford Ranger XLT 2.3L ODO, Starter VIN: 1FTKR1AD3A
Intermittant no-crank with ODO showing dashes and Anti-theft light radidly flashing. Problem will go away if key is cycled several times. I have already replaced the ignition switch (cheap/easy) Codes P1260 (Theft Detected) and P0219 (Eng over-speed) in PCM. C...
Fixes & Summaries for Ford
|2003 Ford F-250 Super Duty XLT 6.0L No Start VIN: 1FTNX21P43
Well after all of the wiring checks and loading the circuit I decided as a last ditch effort to replace the cam sensor connector. Plugged it in and tried cranking it and I thought it wouldn't start but it did. Runs really well now - only problem I have is a ... Trouble codes: P2164.
|2005 Ford Explorer Limited 4.6L Engine noise VIN: 1FMDU75W25
Well, I took care of this engine. Sent cylinder head to a local machine shop and got it all fixed up, Got a new piston and rod from a dealer which came with rings and bearings and everything all assembled. Installed new timing chains, guids and tensioners. ...
|2006 Ford F-350 Super Duty XLT 6.0L No Start VIN: 1FTWW31P76
hey i would like to take a minute and say thanks to everyone who repied to this post the problem was the high pressure oil pump and again i would like to say thanks.
|2008 Ford F-550 Super Duty XL 6.4L Low Airflow VIN: 1FDAW56R28
I WANT TO THANK EVERYON THAT RESPONDED . CUSTOMER HAD TO TAKE THE VEHICLE IT IS A WORK TRUCK. WELL THE TRUCK RETURNED TODAY AFTER 2 WEEKS BEING GONE. WE PULLED THE EVAPORATOR OUT AND IT WAS PLUGGED WITH DEBRIS. IT IS FIXED NOW.