|Prev||Professional Automotive Repair Technical Discussions for May 26, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|2007 BMW X3 3.0si 3.0L Poor Idle Quality, Cuts out
This vehicle is a 2007 X3 with VIN: WG57660. It is 2.5l engine from the European market,but I guess essentially the same controls etc as the US 3.0 version. There were several jobs done on the engine including replacing a failed MAP thermostat and tackling an ... Trouble codes: 2D06
Fixes & Summaries for European
|2006 Audi A3 2.0L Misfire, MIL Lamp on VIN: WAUMF78P26
Thanks to all that took the time. All good suggestions. I confirmed that it wasn't a purge valve stuck open and tried to inspect the valves for carbon build up. I was limited to what I could see in there but since eliminating just about everything else, I info... Trouble codes: P0300 (p0301-), P0301 (p0303-), P0303 (p0304-), P0304.
|2000 BMW 323i 2.5L Starting VIN: WBAAM3348Y
Customer purchased a new key. I programed the system by turning the key on then off, pressing and holding in 1 button while pressing the center button 10 times, then release the other button and car spun over and fired right up. Now I can move on to the stal...
|2004 BMW 325i 2.5L Surge, Cuts out, Stall, MIL Lamp on VIN: WBAET37434
Well i would like to thank all who helped with this one. I sent it to a local shop that deals with a lot of bmw's they replaced the fuel filter that i had purchased from them, and it ran great. So once again you guys are the GREATEST THANKS Trouble codes: P0328 (knock sensor 1 circuit high input bank1), P2197 (oxygen sensor signal biased/stuck lean bank2 sensor1), P2195 (oxygen sensor signal biased/stuck lean bank1 sensor1).