Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for May 23, 2013
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2003 Chrysler PT Cruiser 2.4L Spark Knock VIN: 3C4FY48B53
Car brought in for mil. The car had a code Random Misfire and number 4 misfire. Test drove and found it would take a while to start and has spark knock. Fuel pump took care of the hard start but not the ping. Replaced the knock sensor without success. A month ...
2005 Chrysler Pacifica Touring 3.5L shifter VIN: 2C4GM68465
-This van came in with a shift lock issue. Would not come out of park. Checked brake switch, shifter and for codes. Early stages of the problem would work 95% of the time. The solenoid was very loud at this time. Quickly became a large problem. I'm a lucky sho...
2005 Chrysler Pacifica Touring 3.5L Unknown VIN: 2C4GF68425
customer came in complaining of excessive oil consumption, IATN has nothing on this, but a google search turned up tons of complains with no solutions, some had dealer re-ring under warranty. I checked pcv seems to be working normal. air filter looks due but n...
2008 Chrysler Aspen (Truck) Limited 5.7L MIL Lamp on VIN: 1A8HW58208
Hello to all, I have a 07 Aspen that intermittently sets a code P0133 for bank 1 sensor 1 slow response. We have swapped sensors from bank to bank, checked for exhaust leaks, vacuum leaks and found no problems. It actually appears to be running on the rich si... Trouble codes: P0133 (02 sensor 1/1 slow response)
2002 Jeep Liberty Sport 3.7L Engine VIN: 1J4GL48K92
Help! I have a Jeep liberty here that has what sounds like a lifter noise on the drivers side. Customer replaced all lifters and cam followers on drivers side. It still made the same noise so he brought it to me. We found 2 broken valve spring on drivers side....
2003 Jeep Grand Cherokee Laredo 4.0L power windows VIN: 1J4GW48S93
Customer came with no windows or mirrors working found broken wire in door jam. Repaired the wire now power mirrors work but not windows. Checked for power and ground at switch have both. Jumped power and ground to window motor and it operates fine. Tried a kn...

Fixes & Summaries for Chrysler
Fix/Summary Answers
2004 Dodge Ram 2500 Truck SLT 5.9L MIL Lamp on VIN: 3DFKU28C84
customer did not want to spend any more money on this truck he is trading it in sorry i didnt get a fix thanks for the 6 responses greg Trouble codes: P0192.
2008 Dodge Caliber R/T 2.4L Trans overheating VIN: 1B3HB78K88
First of all Thanks for the replies! I purchased a dipstick and the fluid was OK and the last service used the correct CVT fluid. I added an external cooler along with the factory cooler and the customer has been driving for a week, so hopfully fixed. Thanks a...
1998 Jeep Cherokee Limited 2.5L No Start, Cuts out, Stall VIN: 1J4FT28P1W
Hello folks, I have found the problem and fixed it with certainty. Against the firewall and the rear of the cylinder head is a 14 pin connector that had mice or rats chewing on it and cut 4 wires in half. soldered and heat shrinked them no problem with starti...
2007 Jeep Liberty Sport 3.7L Poor Idle Quality, Misfire, MIL Lamp on VIN: 1J4GK48K87
Thanks to all who posted. As most of you indicated this vehicle had a valve problem with #1 cyl. Customer declined repairs at this time. Trouble codes: P0300.
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next