|Prev||Professional Automotive Repair Technical Discussions for May 17, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for GM
|2006 Buick Terraza CXL 3.5L Door Locks And Int Lights VIN: 5GADV33LX6
Here is what is happening the I/P fuse panel fuse #1 (trunk/lps) keeps blowing anythime the dome lights are turned on or the door locks are unlocked. The body control module clicks like a relay is switching and the red/white wire connect c2 pin 36 at fuse box ...
|2005 Cadillac SRX 4.6L transfercase VIN: 1GYEE63A25
This Caddy has a very loud snapping popping nasty noise on moderate to heave acceleration. Sounds like its coming from the transfer case area. Is it cost effective to rebuild these cases or should I just order a reman. Or should I look elsewhere in the drive l...
|2000 Chevrolet Suburban 1500 LT 5.3L Compressor
Suburban came in to the shop with the a/c compressor not kicking on, noticed the customer replaced the pump himself, thought that maybe he didnt have enough 134a in the system so we vacuumed and recharged system, didnt do the trick. We looked at the high and l...
|1997 GMC Yukon SL 5.7L Oil Pump VIN: 3GKEK18R6V
This my personal truck, with 247,000 mile on it. After installing a new GM crate motor (due to rotted out head gaskets) there is buzzing type noise from the oil pan/pump area. The noise is loudest at at the bottom of the oil pan. After initial cold start and...
Fixes & Summaries for GM