|Prev||Professional Automotive Repair Technical Discussions for April 29, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1998 Dodge Ram 1500 Truck ST 3.9L compressor VIN: 1B7HC16X0W
I hooked the scanner to it to get i/o data and everything appears normal. Engine temp accurate, engine load at idle 4%, A/C request has 3 items and they change from off to on as I move the switch to various positions. I bypassed the relay and it does blow cold...
|2004 Dodge Ram 2500 Truck ST 5.9L no overdrive VIN: 3D7KU28C94
transmission has no codes does not have overdive has good pressure there first second and third , but no pressure in overdrive. all electrical is working, please help on this one, thanks in advance
|2006 Dodge Ram 3500 Truck SLT 5.9L Extended crank VIN: 3D7ML48C86
Thanks for taking the time to read this, The customer is complaining of long cranking times, he thinks it seems to be getting worse. We are talking 3 to 5 seconds, it just does not pop off right away. It has new batteries so it's spinning pretty fast. It does ...
Fixes & Summaries for Chrysler
|2004 Dodge Ram 2500 Truck ST 5.7L Misfire VIN: 1D7KU28D34
My theory is the cam sensor was telling the coil(s)to stay on and was breaking the coil(s) and shorting out the ecm. The fix was new oem cam sensor, used ecm, and another coil.Thanks for the help.