|Prev||Professional Automotive Repair Technical Discussions for April 21, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2003 Chrysler PT Cruiser Touring 2.4L Misfire, MIL Lamp on VIN: 3C8FY58B13
would like a second opinion on this one, found a burnt number one plug wire plugs where old also, it was misfiring on number 1 and 4, replaced plugs wires and the coil, still had miss on 1 and 4 and return of my p0351 code, I disconnected cam sensor and after ... Trouble codes: P0351, P2302
|2001 Dodge Durango 4.7L Timing Chains
Alright, i know there are lots of 4.7L tech help posts, but none of them address the issue im having. Im tryin to set timing on this engine. It uses a primary chain to drive 2 secondary chains, the whole timing chain sets new (guides, tensioners, and chains). ...
|1996 Jeep Grand Cherokee Laredo 5.2L Mileage VIN: 1J4FZ58YXT
Customer stated that even though his Speedometer is accurate, his odometer stopped at 536870. He wants to fix it and on a tip from a local Mopar dealer tech, we replaced the Cluster. That didn't fix it. The mileage on the Odometer display went to the same mile...
Fixes & Summaries for Chrysler
|2000 Chrysler Concorde LXi 3.2L MIL Lamp on VIN: 2C3HD36J3Y
Thank you for all of the replies. I went through and checked all of the powers, grounds, signal feeds and did voltage drop tests on all of the components. These tests all checked out good. I was about ready to replace the PCM. I removed the it and checked ... Trouble codes: 00253 (This not a p0253 it is a 00253 undocumented code).
|2011 Dodge Durango Crew 3.6L No Start, long crank VIN: 1D4RD4GG4B
I ended up swapping all the relays in the under hood box that are related to any kind of starting cranking pcm fuel pump ect. with other relays in box for a/c horn fog lamps so far so good sometimes just gotta try simple stuff im gonna test those relays soon ...