Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for April 1, 2013
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2004 Dodge Stratus SE 2.7L Hesitation, Cuts out VIN: 1B3EL36T24
Well hello again. I almost got this one but it looks like I'll need some advice from someone out there. Customer's complaintis that her 2004 Stratus 2.7 L. jerks on the freeway and it wants to take off from a stop. This are all the trouble codes I got, P736, P... Trouble codes: P0736 (Gear ratio error in reverse), P0720 (Output speed sensor error), P0731 (P0732 Gear ratio error in 1st 2nd.), P1790 (Fault immodiately after a shift), P0201 (Fuel injector 1 circuit), P1684 (Battery was disconnected)
View
2006 Dodge Ram 2500 Truck SLT 5.7L no shift any gear VIN: 1D7KS28D66
Driving 30 mph just stop moving no diference in any gear.Had towed to shop,thinking possible converter?
View
2006 Dodge Ram 1500 Truck ST 4.7L Intake Vacuum VIN: 1D7HU18N66
Truck came in running poor at times and a rich code bank 1. Also had an O2 bank 1 sensor 1 high and 2 missfire codes. Tried replacing the Bank 1 O2 sensor - no change. Checked the fuel pressure, 70psi, the high end spech is 60psi. Replaced the fuel module, fue...
View
2007 Dodge Nitro SXT 3.7L Starting VIN: 1D8GT28K27
This vehicle was towed in with intermitent no start. We were able to get vehicle to start then it just clicked. Voltage at the starter is only three volts. The starter relay can have power applied to pin 87 an vehicle will start.ther is only 3 volts on relay p...
View
2001 Jeep Cherokee Sport 4.0L Airbag VIN: 1J4FT48S81
Hi Guys, Got this Jeep with the airbag light on. Could not communicate with the airbag module with 2 different scanners. I checked the CCD buss and it checked good. I replaced the air bag module and now have communication. I am now getting a code "Pressure sw...
View
2008 Jeep Commander (Truck) Limited 5.7L electric window VIN: 1J8H658248
Customer complained both front windows inop. Also radio wont shut off when door is opened and key is removed. Rear windows do work at the master switch, and the pass front window will work at the passenger door. Our scanner will not communicate with the driver...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
1998 Dodge Ram 3500 Truck 8.0L Oil consumption VIN: 3B7MF36W6W
First off, I want to apologize for not proofreading and making everyone believe it had 11,000 miles- it is 110,000. Further discussion with the customer reveals it has had consumption increasing steadily for the last year. It pulls heavy loads such as anhydrou...
12
2003 Dodge Ram 1500 Truck Laramie 3.7L No Start, Stall VIN: 1D7HA16K13
Thanks for all the help! It turns out the new OE PCM was defective out of the box. Just got another one installed and all is well. The cam & Crank sensor could not be re-learned on this year truck. The DRB did not have that option. The ASD relay ground ...
12
1994 Jeep Cherokee SE 4.0L No Start VIN: 1J4FJ28S8R
1st thing thanks for all the help, as it turns out the 94 jeep 4.0 does need a cam sensor signal to start the engine, I'm taking a lot of guff for that as I thought that the early jeeps did not need a cam signal and we spent way too much time on this vehicle. ...
15
1998 Jeep Grand Cherokee 5.9 Limited 5.9L Mechanical VIN: 1J4GZ88Z2W
After taking closer look , we found the crankshaft pully is bad, install new pulley & the noise went away, thanks to everyone who took the time to help out
26
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next