Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for March 28, 2013
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2005 Chrysler Town & Country (Van) Touring 3.8L blower mtrs,radio,wipers,interior lighting, VIN: 2C4GP54L85
Hello, I got a wierd one hear.Cust. complains intermittenly when applying brakes that all electrical items shut off.This can be seen clearly in radio and blower operation.I have been able to recreate this myself.Blower and radio along with every other electric...
View
2009 Dodge Grand Caravan SE 3.3L Starting VIN: 1D8HN44EX9
Van towed in for no crank no start.tested batt weak and cable end broken,repaired and still nos start.perform batt reset,still no start.this van has a fobic and a wireless ignition node (win)only have one fobic to work with at this point.notice when insert key...
View
1994 Jeep Cherokee SE 4.0L No Start VIN: 1J4FJ28S8R
towed in crank no start. no spark, no rpm signal in pcm with scan tool data stream. checked crank sensor voltages, 5 and 8.3 volts and a ground from center sensor wire. replaced crank sensor 2 times 1 factory sensor. replaced engine controller w/rebuilt and st...
View
2002 Jeep Grand Cherokee Overland 4.7L Electronic VIN: 1J8GW68J42
i inherited this jeep after a coworker put valve cover gaskets and now the transmission is going into limp mode.scanning the trans module i intermittenly lose data on the scanner.its setting a code 1698 and setting a code 120 in the trans module.i have checked...
View
2007 Jeep Liberty Sport 3.7L mil lamp VIN: 1J4GL48K67
Hi Guys This car is running rough. Has p0300 and others. Figuring out what is causing it to misfire is easy. The trouble I'm having is the MIL is not lit with the engine running. The MIL is on with KOEO. No MIL with KOER with codes stored in PCM. It had 4 c... Trouble codes: P0300
View
2009 Jeep Compass Sport 2.4L MIL Lamp on VIN: 1J4FT47B19
Hello Techs. This Jeep has two codes P2017 and P2004. Having to do with the intake manifold runner control. I have read that you have to replace the intake manifold to fix this problem. Has any body done this replace the manifold? My Solus does not have any tr... Trouble codes: P1217 (intake manifold position sensor high), P2200
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2005 Chrysler Pacifica Touring 3.5L timming belt VIN: 2C4GM684X5
this one was difficult but we got it thanks for all the post we rechecked the timming several times and it was good took some advise from iatn and replaced the cam sensor and the bucking and jerking went away we still had a code p0016 we read here on iatn abou...
14
2005 Dodge Ram 1500 Truck ST 5.7L transfer case VIN: 1D7HU18D35
NOT ALOT OF HELP ON THIS ONE. I GUESS IT WAS A RARE ONE. ANYWAYS THANKS FOR ALL YOUR HELP TIM FROM WISCONSIN. FIX WAS THE ENCODER MOTOR. APPARENTLY THERE ISNT ANY CODES FOR THIS SYSTEM THAT WE COULD FIND, NOR DID WE HAVE ANY. ALL WE WOULD GET IS "INTERNAL ERR...
5
2009 Dodge Ram 3500 Truck SXT 6.7L 4th-5th-6th gears VIN: 3D7MX49L49
Looks like Bad PCM on this 68RFE. PCM will not ground OD solenoid when commanded to do so. Shift strategy is as follows; has 5-solenoids one for UD 1-2-3, one for OD 4-5-6. Other 3-solenoids complete complete 1-2-3 or 4-5-6 depending on whether OD or UD is ...
5
2007 Jeep Wrangler Unlimited X 3.8L Check Engine Light VIN: 1J4GB39117
Ok, so what fixed this vehicle was a PCM. I still do not know why the PCM failed and set this code at the same time the engine was replaced other than coincidence. It was a very weird, and random problem but it's fixed now. Thanks for all of the input.
5
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next