|Prev||Professional Automotive Repair Technical Discussions for March 3, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|2002 Ford F-250 Super Duty Lariat 7.3L No Start VIN: 1FTNW21F92
After a head job this truck will no longer start. I have a snap on verus and have checked what I know on scan data. I am lost, as everyone says, I am not a diesel guy. I miss my gas head job where you turn the key and vroom done. I keep reading horror stories ...
|2003 Ford Expedition Eddie Bauer 5.4L Compressor VIN: 1FMFU18L63
Hey everybody. I bought my wife this 03 expedition knowing that the compressor was not coming on, just thinking it was a low charge or failed clutch. It has a full charge and all the fuses are good. The PCM is not grounding the clutch relay. Compressor clutch ...
|2007 Ford Focus S 2.0L air distribution VIN: 1FAHP37N27
Blower speeds work, temp works, air only coming out of lower (floor) vents. Observing some movement in blend door hardware when shifting switch thru different position selections but air only comes out from below.
Fixes & Summaries for Ford
|1998 Ford Contour GL 2.0L Poor Idle Quality VIN: 1FAFP6633W
thanks for all you guys who said intake leaks,the problem was the loose motor mount was letting the motor sway back and forth. After it broke the exhaush pipe, the motion of the motor some how cracked the little injection molding tid bit on the intake, just hi...
|2002 Ford F-450 Super Duty XL 7.3L Misfire
Sorry for the delay, This thing is fixed. The problem with the datasteam on the scan tool was the PCM. We went ahead and replaced the IDM also due to the possibility it may have been damaged from the welding also. We still had the intermittant misfire and inje... Trouble codes: P0541 (Air intake heater circuit).