 Prev |
Professional Automotive Repair Technical Discussions for January 19, 2013 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 1998 Chrysler Sebring LXi 2.5L Cuts out, Stall, MIL Lamp on VIN: 4C3AU52N9W Greetings, I'm posting this recent diagnosis and repair to help any techs that may run into a similar problem in the future. In searching through the fix database and the internet in general, I didn't see this particular scenario even one time and I suspect ... |
View | |
| 2008 Chrysler 300 LX 2.7L Starting VIN: 2C3KA43R58 Vehicle came to us with a no start no communication problem. The ,hvac,door modules,radio,ecm are all dead.Powers and grounds seem fine. I can talk to the steering column module and instrument cluster.The instrument cluster does not light up at all but has no ... |
View | |
| 1995 Jeep Cherokee Sport 4.0L Excessive Emissions VIN: 1J4FJ68S5S Hi, I have my sons jeep and nox emissions are high at 600-800 ppm. scanned data tps, coolant temp, o2 sensor switch rate & risetime are all good. long term fuel% -4.9 5.1. does not move when forcing o2 signal rich, lean. nox emissions go low when forced rich. ... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2002 Dodge Stratus ES 2.7L Timing Chain Tensioner VIN: 1B3EL56R12 Hi all, Thank you for taking your time to response. We finally found the problem. The plastic intake was warped. We check with smoke machine found smoke under the inake plenum. We ordering the new manifold right now. This was causing misfire cylinder #5. Agai... |
7 | |
| 2007 Dodge Dakota ST 3.7L cylinder#3 VIN: 1D7HE22K47 The vehicle was with me for approximately a week. I checked the valve train and found no rockers off, no mushroomed valve stems, no sticking lash adjusters or broken valve springs. I used a noid light on the affected circuits and everything checked out fine. N... |
26 |
