|Prev||Professional Automotive Repair Technical Discussions for January 12, 2013
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1999 Chrysler Town & Country (Van) LX 3.8L interior light VIN: 1C4GT54L1X
All the interior lights & switches work good. The problem I'am haveing is the alluminuss lights on the rear wiper & defrost switches that are located on the lower center part of the console work good in the day time when the headlights are off & you have the r...
|2002 Chrysler Town & Country (Van) EL 3.8L Fuel gauge VIN: 2C4GT44L62
Thanks to everyone for the help in advance. I have this van in here from a body shop that they use for a loaner. After driving for a few miles the fuel gauge will drop to nothing. Sitting there idling or with the key on its fine. I checked the evap vent hose p...
|2000 Dodge Intrepid 2.7L No Start, Poor Idle Quality, Hesitation, Stall, Misfire VIN: 2B3HD46R4Y
Thanks to all reading this. I am really in the weeds on this one. I inheritted this car from a coworker after he spent a couple of days getting nowhere. When the car came in as a no start shortly after getting gas, we were able to get it started and limp into ... Trouble codes: P0171, P0174, P0300, P0305, P0306
|2004 Dodge Ram 1500 Truck ST 5.7L cruise control VIN: 1D7HA18D24
my cruise control will shut off intermentely while driving. some times it will work for a long period then other times it will keep shutting off about less than a minute after I turn it on. It will shut off even if cruise is not in use, but turned on. Thanks f...
Fixes & Summaries for Chrysler
|2000 Dodge Ram 1500 Truck Laramie 5.2L No Start, Poor Idle Quality, Cuts out, Stall VIN: 1B7HC16Y8Y
truck is running like a champ once again. thx to all of you that replied. Kay however nailed it. others did suggest ignition timing,too. i was assured by the customer that the truck had alwasy been a "start and go" truck "NO PROBLEMS". it was obvious from the ...