|Prev||Professional Automotive Repair Technical Discussions for December 24, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|2001 Ford Mustang 3.8L Parking Brake VIN: 1FAFP44451
The car does not hold passed 800 rpm in drive or reverse all materal has been refinished or replaced three times with difrent manufactured parts .. The parking brake lever has been reset and can only be aplied half way .. Need some help do not no wat to do nex...
|2007 Ford F-350 Super Duty XLT 5.4L timing chain VIN: 1FTWW31537
truck has been maintain every 3000 miles at are shop from day one. around 100,000 start geting chain noise after oil change. started getting on cold start ups. At about 118,000 i put all new timing chain, guides, and tensioners in and sill have same promblem. ...
Fixes & Summaries for Ford
|2001 Ford Taurus SE 2-Valve 3.0L Coolant Loss VIN: 1FAFP55UX1
want to thank every one for your help on this one found coolant in oil so it is getting a differnt motor. never thought of that till i read some of your replies pulled dipstick and found way over full and all milky so thats the way that goes. thanks again.
|2003 Ford Explorer XLT 4.6L Surge, High idle VIN: 1FMDU73W53
Unfortunately, this vehicle left us at the owner's request before we got it pinpointed. However, we passed along your suggestions and he has reported back to us that he installed a Ford IAC motor and the problem is gone. Never ceases to amaze me how many tim...
|2005 Ford Expedition XLT 5.4L Communication VIN: 1FMPU16545
Thank you to everyone who replied. After unplugging the TCM, communication was restored.
|2008 Ford F-350 Super Duty XL 6.8L Stall VIN: 1FTWX31Y48
Ok I took Steves advice and made some jumper wires, when it would not start and bypassed the fuel pump driver module. The truck still would not start so I removed the tank double checked my work and replaced the new pump, first time that I recieved a bad one f... Trouble codes: P0191.