Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for November 21, 2012
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2006 Chrysler 300 (Car) C 5.7L fuel smell VIN: 2C3KA63H96
This is the boss' car. A 300C 5.7L. Since putting in a set of plugs, Champion Platnum not Copper (his choice not mine), this thing has had a strong fuel smell inside the car when the AC is on vent. I cannot find a liquid fuel leak on this thing to save my li...
2001 Dodge Ram 1500 Van 5.2L heater VIN: 3B7HC13Y51
came in with brake noise and heater inop was 1 gallon low on coolant installed a water pump and returned to cust. came back next day saying that the heat is not working in morning when cooled but in middle of day when its warm out side it blows 110 deg temp an...
2006 Dodge Ram 2500 Truck SLT 5.9L 3rd gear starts VIN: 3D7KS28C46
Truck came in with stuck in first prob. Scan tool read 99 psi on actual Replaced gov sensor and solenoid. Worked perfect for about 10 Kms. Then 3rd gear starts. Gov actual was stuck at zero. Replaced governor sensor again( figured defective). Worked for about ...
2006 Jeep Wrangler X 4.0L Shifting VIN: 1J4FA39S96
Customer brought this Jeep in and stated that he had hit a bump a couple days prior and that sometimes it would not shift into overdrive. The codes retrieved were P1790(fault after shifting) P0720(output speed sensor) and P0736(error in reverse gear ratio). We...

Fixes & Summaries for Chrysler
Fix/Summary Answers
2007 Chrysler 300 (Car) Limited 3.5L heater VIN: 2C3KA53G67
Hey guys thanks for all the replies. Problem was heater core. The cooling system had stop leak installed to plug leaks before trade in. Alot was put in and it settled in the passages of the core which is the lowest point in the system. so now vehicle has great...
1997 Dodge Dakota 3.9L Cuts out, Misfire VIN: 1B7GL23X9V
Thank you all for your quick responses. Gary from Colorado nailed it. The cam/crank reference was about -15, set it to zero and the truck runs great. The frustrating thing is that the Modis scan tool shows only "Sync yes or no" in the data. You have to go into...
2003 Dodge Ram 1500 Truck 3.7L valvetrain VIN: 1D7HA16K63
Thanks to all who responded. It was a mixed repsonse as to weather you need any special tools for this timing chain alignment or not. The customer has not yet given authorization for any repairs. He is not sure if the truck is worth the expense. Thanks again.
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next