Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for November 9, 2012
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1995 Chrysler Cirrus LX 2.5L Engine Timing VIN: 1C3EJ56H2S
1995 Chrysler Cirrus LXI was brought in earlier this week for a coolant leak coming from a bad O-ring on the back of the water pump mounting bracket. Water pump and timing belt were originals on a car with 98,000 miles, so I sold the customer on replacing both...
View
2002 Dodge Stratus SE 2.4L No Start VIN: 4B3AG42G92
The customer has been tring to fix it hisself and gave up.It will start when its coold but after it has run up to operateing temp and you let it sit for about 5 to 10 minits it has no spark and no codes it has a crank signal, fuel press, but no spark, you turn...
View
2003 Dodge Durango SLT 4.7L MIL Lamp on VIN: 1D4HS48N03
WHATS UP GUYS ,I need advise or a least a clue , to solve this issue. this Durango come to the shop w/mil on P0016 IS trigger as sun the engine spin , customer got engine overheating some one replace the timing chain ,head assembly,just one passenger side. thi... Trouble codes: P0016 (Camshaft position sensor out of the range)
View
2003 Dodge Ram 1500 Truck 4.7L oil pressure gauge VIN: 1D7HU18N43
oil pressure gauge will work at times sometimes when you start the truck it works fine other times will not work. If you restart it when it does not work it starts working again. Sometimes neddle goes up fast other times slower. Tested cluster with trip switch...
View
2005 Dodge Ram 2500 Truck Laramie 5.9L No Start VIN: 3D7KS28C75
First vehicle came in as a crank no start, replace cam sensor and vehicle starts and runs fine, but code p0341 keeps resetting. Checking wiring and replace connector at cam sensor as it had been rubbing on the Power steering pump bracket. Check signal at PCM a... Trouble codes: P0341
View
2008 Dodge Charger R/T 5.7L Surge, Stall, Misfire, MIL Lamp on VIN: 2B3KA43H48
This one is a good one, the car came in it is stalling.When idling the asd relay is clicking & the fuel pump relay is clicking the #7 injector is missing a pulse. checked the ground from the ecm to asd relay, it is spiking on and off. checked cam and crank sig... Trouble codes: P3449, P3441, P3425, P3401, P0688
View
1988 Plymouth Sundance 2.2L No Start VIN: 1P3BS48D4J
This car just died in a parking lot and was towed here. We checked it out and found that we had fuel pressure and no spark. We found a bad coil wire and replaced it and still no spark to cap. We changed pick up and still nothing. Coil has power on cranking and...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2006 Chrysler Town & Country (Van) Touring 3.8L Gas Cap VIN: 2A4GP54L56
tried batt disconnect with scanner-no help.ended up unhooking battery for an hour and sofar so good.thanks for all the suggustions.
6
2009 Dodge Sprinter 2500 3.0L MIL Lamp on VIN: WDWBE8ACX9
I have yet to see this vehicle again. Thanks for the responses. I am closing the request, but will post findings as they occur. Trouble codes: 2355 (EGR control air mass too large), 2011 (MAF deviation too high).
3
2000 Jeep Grand Cherokee Laredo 4.7L trans control relay VIN: 1J4GW48N2Y
i'm sorry to have wasted anyone's time thinking about this one.when i was doing my initial checks of the system, i inadvertently started looking at the wiring diagram for the 4.0l, which is completely different.this morning my plan was to force the tcm relay "...
1
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next