Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for September 17, 2012
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2002 Chrysler Sebring LX 2.7L Cooling System VIN: 1C3EL46R12
Having troubles with this one. The coolant starts boiling over even though the temp gauge is in the middle; normal operating temps. Data and infrared temp gun are similar. Can hear the coolant boiling inside the expansion tank and if we let it go will eventual...
View
1995 Dodge FREIGHTLINER 5.9L Alt Gauge
NEED HELP GUYS! had my helper disconnect the wiring on the back of the alt to check for 4amp draw. killing battery overnight, didnt know he was going to NOT remember where the wires go back! i need a wiring diagram or help with the wires please! there are abou...
View
2007 Dodge Dakota ST 3.7L Misfire VIN: 1D7HE22K07
customers concern is a very intermitant rough idle, as well as sluggish acceleration. DTC's P0202, P0204, tested wires for shorted together, shorted to ground, for opens, and shorts to power, wiring all ok. checked resistance of both fuel injectors, one read 1... Trouble codes: P0202, P0204
View
2000 Jeep Grand Cherokee Laredo 4.0L Instrument Cluster VIN: 1J4G248S1Y
Started vehicle, starts and runs fine. After a few seconds odometer goes to zero then one by one other gauges go to zero. Pretty much all the lights come on. Yet it starts and runs good. Checked battery and alternator...both good. Code P1686 stored as a pendin...
View
1999 Plymouth Grand Voyager Expresso 3.3L Cuts out, Stall VIN: 2P4GP44GXX
vehicle will cut out while under a load very intermittently. It will also sometimes stall while idling or under no load very intermittently. This vehicle has zero trouble codes in any control module. When it does stall, it happens immediately, does not "sputte...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2001 Chrysler 300M 3.5L no start when cam senor is plugged in VIN: 2C3AE66G11
Hey guys im very sorry but the customer desided not to get any deeper in this car they was trading it as is they did'nt want to drop any more money in it but they said they learned a lesson cheaper is not always the best way to save money
4
2001 Chrysler 300M 3.5L no start when cam senor is plugged in VIN: 2C3AE66G11
Hey guy im very sorry but the customer desided not to get any deeper in this car. they was trading it as is they did'nt want to drop any more money in it. but they said they learned a lesson that cheaper is not alway the best way to save money
20
2006 Chrysler 300 (Car) C 5.7L MIL Lamp on VIN: 2C3KK63H36
THANKS TO ALL WHO RESPONDED THE EXHAUST TEMP READINGS HAS TO BE THE SAME FROM THE O2 SESOR EVEN THOU THE 02 WAS GRAPH PERFECT B1S1 TEMP WAS OFF BY 200F FIXED WITH OEM NOT WITH A BOSCH Trouble codes: P1128 (Closed loop not achieved bank 1).
8
1998 Dodge Intrepid ES 3.2L Stall, MIL Lamp on VIN: 2C3HH56J9W
replaced crank sensor,has stalled once in 2 weeks,seems ok now.Thank you every one for help Trouble codes: P0351, P0356, P0106.
6
2004 Dodge Stratus SXT 2.4L No Start VIN: 1B3EL36X14
The Fix for this one was a blown fuse ,that didn't look or test blown .Bill [...] an IATN member suggested this" The only time I've had a Chrysler product give me a "no buss" message there was a blown fuse -- it was one of the box-type fuses for the ASD (which...
24
2002 Jeep Grand Cherokee Laredo 4.7L Unknown VIN: 1J4GW48N92
customer finally returned for a second look. borrowed a chassis ear from another shop; sure enough right side ujoint making noise. thanks to all those who replied.
8
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next