|Prev||Professional Automotive Repair Technical Discussions for August 25, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1992 Dodge D150 5.2L iac, tps map, sensor VIN: 1B7HE16Y5N
hey fellow iatners and heres my problem this week. i have a 92 dodge pick up 318 v-8, i have codes for the tps iac and map sensor all high voltage. pinned out harness from tps iac and map sensor to the ecm conn. to make sure no wires were burnt together or sho...
|2002 Dodge Neon SE 2.0L torque converter
I have a 2002 dodge neon i am looking at , has a code p0740 torque converter clutch control circuit. I checked all the wires in the circuit for broken wires or bad connection and no condition existed. I then put a solenoid pack on it but that did not cure the ...
|2007 Jeep Grand Cherokee Limited 3.0L Mechanical VIN: 1J8HR58M27
this is a jeep with a deisel engine. i have a oil leak left rear of engine. also had oil pan and rear main leak. resealed oil pan and put in new rear main. those leks are stpped. i have another leak behind starter. does anyone know what is there that could lea...
Fixes & Summaries for Chrysler
|2000 Dodge Neon ES 2.0L engine vibration VIN: 1B3ES46C6Y
thanks for the replies on this one.. got a bunch,turned out to be the mounts needed to be adjusted,found a procedure for the adjustment of the torque struts which solved the problem, anyone need this procedure email me and I will upload it to you,2 pictures 1 ...
|2005 Dodge Grand Caravan SXT 3.8L Transaxle VIN: 2D4GP44L95
Well I can honestly say that I'm going to get new glasses. I had the customer take the van (they really needed it) and drive with the selector in 3rd. It came back Monday 8-20 for me to finish the work. I removed the pan for a re-inspection of the valve body. ...
|2007 Dodge Sprinter 2500 3.0L sticks in 3rd gear VIN: WD0PE84557
the pcm was never programmed for the rear end that was put in the vehicle even thought the dealer said they did program it took it to a different dealer and they programed the pcm and the vehicle drives perfectly fine thanks for al your help people
|2007 Dodge Ram 3500 Truck ST 5.9L A/C compressor VIN: 3D7MX48C57
Got it! It was short in the wire between TIPM module and the transducer/pressure switch output leed LT BLU with brown tracer. For whatever reason when I tested input from transducer at the back of TIPM the signal leed read 5v and it should have read .8-2 volts...