Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for August 7, 2012
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2002 Chrysler PT Cruiser Dream 2.4L Poor Idle Quality, Stall VIN: 3C8FY68B92
poor idle quality stalls at stops runs well off idle ckp/cmp sync(ok),trims at sft -9,fft -21 ect act(ok)@idle(park)(in gear very rough)missfire counter bounces from one cyl to another,fuel press. @ 52 psi replaced coil ckp and physically checked egr vave(ok)w... Trouble codes: P0300
2003 Chrysler PT Cruiser GT 2.4L Surge, Cuts out VIN: 3C4FY78G43
customer complained of engine surge around 1700 rpm,had code for cam sensor interment. replaced sensor again,no help. code will set every time engine rpm is greater than 1500 and engine will surge like rev limiter is on. starts and runs great,untill then. i ch... Trouble codes: P0344
2004 Chrysler Sebring 2.7L Cuts out, Stall VIN: 1C3EL46R44
Thanks for any help on this one, vehicle will stall while driving, at idle or just cruising down the road. Customer will pull over and engine will start right back up evertime. Current codes on arrival are po129 map sensor circuit and po513 skim key circuit. H... Trouble codes: P0513, P0129
2005 Chrysler Town & Country (Van) Limited 3.8L rear air VIN: 2C8GP64L95
Hello , We are having a time with this one! First compressor seemed to have a bearing problem in clutch. We replaced it with a factory compressorin May, van returned end of July with the compressor scattered internally and it was locked up. We replaced compre...
2007 Dodge Dakota SLT 3.7L Misfire, MIL Lamp on VIN: 1D7HE48K37
First time I have had a misfire I can not seem to find!Truck drove approx 280 mile trip, would not start next day on first attempt, started on second try but check eng lite flashes and has code p0300. Misfire monitor indicates cylinders 1, 3, 5 are misfiring. ... Trouble codes: P0300
2007 Dodge Nitro SLT 3.7L compressor VIN: 1D8GT58K77
We originally replaced the compressor due to a noisy pulley bearing, a none serviced part,with an O.E. reman compressor. After a few days, the front shaft seal started leaking profusely. Put a second Chrysler reman. compressor on, and the same thing happened a...

Fixes & Summaries for Chrysler
Fix/Summary Answers
2002 Dodge Neon SE 2.0L shift indicator VIN: 1B3AS46C92
after reprogramming tcm code P0708 for shift range circuit came up. found an open on circuit at pcm. repaired now have all shift ranges thanks to all that replied
2004 Dodge Ram 2500 Truck ST 5.9L Fan clutch VIN: 3D7KA28634
So Thank you all for trying to help me .I was so stumped that i took this to the dealer after replacing condensor fan and high presher switch.Everything on my scan tool looked ok but i could not engage the condensor fan at idle high presher would still go up t...
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next