× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for August 4, 2012
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for European
Help Request Answers
2008 BMW 328xi 3.0L Studders VIN: WBAVC93528
Hoping A BMW guru reads this!! The customer stated that he drove the car thru some water and then the problem occurred. I looked for codes and found none, checked the air box for water and it was dry. When under load in every gear the car studders like your d...
1995 Mercedes-Benz E320 3.2L no start VIN: WDBEA32E3S
Hi everybody needs some inputs in this car.I replace ovr. for not fuel pressure and not injector post;also no spark the relay take care fuel pressure and injector post.and rarely spark also code 17 after replace ovr.clear the code and never showup;I check wiri...

Fixes & Summaries for European
Fix/Summary Answers
2002 Audi TT Quattro 1.8L MIL Lamp on VIN: TRUUT28N82
As usual the answer was in the basics. The suggestions about the wastegate were good. I forfot to mention that we had tested it. Ralph was right on. The N75 solenoid was bad. The resistance was ok but it did not click when power was applied to it. A new solen... Trouble codes: P1555 (Maximum boost pressure exceeded).
2001 BMW 525i 2.5L Compressor VIN: WBADT43421
Thank you all for your time and effort. I feel rather dumb for not thinking it through and just processing the thought, "what does a pressure switch do?". Slammed a new switch in it and the clutch came to life! Thank you again! IATN is the best!!
2001 Mercedes-Benz E320 3.2L Airbag VIN: WDBJF65JX1
After coating all the connector contacts at every step from SRS module to airbag with Stabilant 22 i reset the light and it did not comeback. I drove the car a few times to see if maybe it was going to come back on but it seems to be fixed. Thanks for the help...
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next