|Prev||Professional Automotive Repair Technical Discussions for July 7, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1997 Dodge Intrepid 3.3L stays in 2nd gear VIN: 2B3HD46T9V
car come in no start,fuel pump dead,replaced fuel pump,runs but does'nt shift out of second gear allso shift linkage doe s'nt move freely. also at times the engine run rich and will stall inj pulse will be up to 3 millseconds and long term will go as high as -...
|1979 Jeep CJ5 5.0L oil pressure
When engine is cold or semi-cold, oil pressure reads 45 psi at idle & all other rpms. After running for about 1-2 minutes, the pressure will rise to 70 psi at idle, will reach 150 psi at 1300 rpm, & keep going higher at any more rpm. Anything more than light t...
|2005 Jeep Grand Cherokee Laredo 4.7L 2-3 shift VIN: 1J4HR48N75
A friend of mine brought this to me saying he cant believe that third gear is out of this vehicle. So I ran a few test and came up with the two codes P1790 and P0733. When you drive the vehicle it goes in reverse fine. It takes off fine. It shifts into 2nd and...
Fixes & Summaries for Chrysler
|2006 Jeep Liberty Sport 3.7L Unknown VIN: 1J4GL48K76
Turns out my tech changed only one u-joint and the other was bound up. Put it on the rack immediately saw what was wrong. My tech is a new kid and has alot to learn thanks guys for helping him out.