Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for July 3, 2012
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1997 Dodge Neon 2.0L No Start VIN: 1B3ES27C9V
Came in as crank no start - Fuel pressure = 50 psi - checked codes - found p0340 - cranked over with scanner attached - cam and crank value = no with a periodic yes on crank - sync is lost - replaced cam and crank sensor and replaced crank sensor pigtail (melt... Trouble codes: P0340
2003 Dodge Grand Caravan SE 3.3L Master cylinder VIN: 2D4GP44R33
Hey we have this Caravan in the shop that seems to ingest air into the front brakes somehow. The left front caliper always seems to have air show up after 2-4 weeks. The right side almost none. Fluid level never drops, but the pedal height gets quickly worse a...
2001 Jeep Grand Cherokee Laredo 4.0L Misfire, MIL Lamp on VIN: 1J4GW48S61
Good evening, i have a 2001 jeep grand cherokee here with all cylinder misfires, and running hot, we first saw this vehicle for a misfire code on #3 cylinder with engine light on. We replaced the coil pack due to a crack and replaced plugs, a month later it ca... Trouble codes: P0300, P0302, P0305
2002 Jeep Wrangler SE 2.5L No Start VIN: 1J4FA29P52
This jeep was towed in for a no start,no spark coming from coil.another repair shop installed a crank sensor with no luck.i tryed to scan ecm but have no communication.i noticed that with key on my gauges do not work odometer displays mileage.i do have communi...
2006 Jeep Liberty Sport 2.8L Cuts out, MIL Lamp on VIN: 1J4GL485X6
Hello, This vehicle is now very consistently setting a code P0093 and going into limp mode. It will also set a P0101 at times if driven after it sets fuel pressure code and eventually it will set p1186 for inlet pressure. There are no ECM reflashes available,...
2007 Jeep Wrangler Unlimited Sahara 3.8L flashing abs light VIN: 1J4GA59117
Clean 2007 Wrangler, stock wheels and tires. I flashed PCM, ABS, TIPM and SAS. Used wiTech will current legal subscription. ABS light flashes, NO CODES. On road test ignition key chime would not shut off. Tried restoring modules and battery disconnect. Origina...

Fixes & Summaries for Chrysler
Fix/Summary Answers
1995 Jeep Wrangler Sahara 4.0L Poor Idle Quality, Hard Start VIN: 1J4FY49S0S
Well I. started over from scratch. I pulled valve cover, verified valves on compression stroke, ckd marks and stabbed distributor. Vehicle started and ran fine, so not sure what happened the first few times. All is well and running. Thanks to all.
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next