 Prev |
Professional Automotive Repair Technical Discussions for May 15, 2012 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 1993 Ford E-350 Econoline 7.3L Rollover Valve VIN: 1FDKE30M2P I have a ford ambulance that we have recently pulled out of winter storage. Several people had tried putting fuel into the vehicle and it would not take fuel. My guys have found that the rollover valve in the filler neck was stuck closed not letting fuel in. T... |
View | |
| 1994 Ford F-250 XL 7.3L no 2-3 or 3-4 shift VIN: 2FTHF26K8R Hello i'm trying to help my step son out on this transmission problem.original problem was no reverse and no shift other then 1-2.he took it apart and overhauled it but didn't do valve body.put it back in and it had reverse but still only 1-2 shift.took truck ... |
View | |
| 2005 Ford Expedition Eddie Bauer 5.4L Poor Idle Quality VIN: 1FMFU17565 came in with ford diagnosing the vehicle needing catalytic converter. can in my code pooo12. did some testing, we followed up by changing ncam phaser and solenoid to no avail. i even tried taking the alternator out of the loop as to cut down on computer spikes... Trouble codes: 0012 (cam phaser over retarded) |
View | |
| 2005 Ford Excursion XLT 6.8L valve train VIN: 1FMNU41SX5 Thanks in advance. 1 week ago my friend drove kids to school and noticed a loud ticking and brought truck to me. Did basic checks like spark plug loose and exhaust leaks and found nothing. Listened to the engine and test drove and sure enough has a top end kno... |
View | |
| 2006 Ford Mustang 4.0L Charging VIN: VZVFT80N66 Good Morning Thanks in advance for all your help. We have this 06 Mustang w/the battery light coming on intermediately.Tested at battery and found were getting 14.2volts @idle.We have no way to check the diodes. All thoughts will be highly appreciated |
View | |
| 2008 Ford Explorer Limited 4.6L Compressor VIN: 1FMEU75898 Hello guys, I really need your help on this ford explorer 2008 limited edition AC system suddenly stopped working. Checked the low and high side pressure reading, it was all within specified range. Scanned PCM, showed DTC B1255 (Air Temperature External Senso... |
View | |
| 2001 Lincoln LS 3.9L Excessive Emissions, Poor Idle Quality, Surge, Misfire, MIL Lamp on VIN: 1LNHM87A71 Noise at idle from lower rear of engine. Bank 1 is not contributing at idle. LT fuel trim bank 1 at idle -25% bank 2 25% ST bank 1 -5 % bank 2 5 %. Cruise speed 2500 RPM fuel trims get with in 8 % total each bank same. Performed compression test all cylinders ... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 1992 Ford E-150 Econoline XL 5.8L No Start VIN: 1FDEE14H3N Thank you to those who actually read the post and replied. Once it was pointed out that the 37 and 57 wires were power supply to the ECU I realized I had read the diagram incorrectly. Using a diagram from Alldata and a corrected understanding of the system I w... |
16 | |
| 2005 Ford Five Hundred Limited 3.0L Cam Sensor VIN: 1FAFP25135 Thanks to all for the help. Brian was the first to confirm that cam timing will cause a code. The problem was indeed the cam timing. This engine has one cam sensor only, on the front bank, which is the rear chain, if your facing the timing cover. The chains... |
7 | |
| 2010 Ford F-150 STX 4.6L MIL Lamp on VIN: 1FTEX1CW2A FIRST WE WANT TO THANK ALL THAT RESPONDED TO OUR PROBLEM CHILD. TURNS OUT THAT WHILE WE WERE CHECKING THE HARNESS FOR A PROBLEM OUR CODE CHANGED FROM PO150 TO A PO155 B2S1 HEATER PROBLEM. WE FOUND THAT THE CONNECTOR AT THE END OF THE HARNESS WHERE THE SENSOR P... Trouble codes: P0150. |
4 | |
| 2008 Mercury Milan Premier 2.3L Abs VIN: 3MEHM08Z48 Finally got this one fixed. Ended up finding the right front wheel would lock up and not go into ABS activation. So I chased that wheel checking all lines, calipers, pads, rotor, just about everything. What I ended up finding was at the HCU the brake line to t... |
1 |
