|Prev||Professional Automotive Repair Technical Discussions for May 6, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|2006 Hyundai Elantra GLS 2.0L MIL Lamp on VIN: KMHDN45D36
Had vehicle come in with check engine light on. No drivebility complains. Pulled code P0011.Checked freeze frame to see when code sets. Code sets warm at around 20km) cleared codes and can get code to reset after two test drives. Have checked into common issue... Trouble codes: P0011
|2007 Hyundai Santa Fe GLS 2.7L MIL Lamp on
The vehicle came in with P0501. No communication with anti-lock break module also called ESC. HECU checked for all power and ground and the connector input. The module had all power and grounds and continuity seemed to be OK on the CAN lines. I put it together...
|2002 Toyota Prius 1.5L No Start VIN: JT2BK12U32
When Ingnition is turn to ON has NO READY light, and when turn ign to crank, NO crank on engine and Ready and Check indicators blinks together at same time, also Turtle indicator and red high temp indicator turns ON. After this P3000(388)is set on HV ECU. Max ... Trouble codes: P3000 (388 When Charged Batt is low due to leave in N to long)
|2008 Toyota Camry XLE 2.4L abs VIN: 4T1BE46K98
when customer driving car the Abs light and all the other lights starting flashing, speedometer not reading etc. car was taken to the dealer and was diagnose with u0129. anybody have an idea what the problem is. dealer wants to change skid control ECU. it is m...
Fixes & Summaries for Asian
|2002 Isuzu Trooper Limited 3.5L EGR valve VIN: JACDJ58X82
Thanks everyone for all the responses. I guess I can close this out because the light has been off for a week now. It ended up being the tube behind the throttle body was plugged. I cleaned it and cleared the codes and now I am happy and so is my customer. Tha...
|1994 Lexus ES300 3.0L Hesitation, Cuts out, Stall VIN: JT8GK13T8R
The fix was a to replace the engine computer. I had tried a crank sensor first and it seemed fixed, but the car acted up after an extended drive. I opened the computer, but did not find any obvious problems. I was misled when I sprayed water on the crank senso...