|Prev||Professional Automotive Repair Technical Discussions for May 3, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2004 Chrysler 300M Special 3.5L No Start, Stall, MIL Lamp on VIN: 2C3AE76K84
The vehicel came in on it own power but it would stall, and it would take few trys to get it started again. Sometimes a dozen trys. Put it on a scanner and came up with P0340. We replace the cam and crank sensor with aftermarket one, but the same issue. So we ... Trouble codes: P0340
|1975 Dodge D300 Custom 5.9L No Start, warm only=no start VIN: D61FG5J012
This is an old d600 trk, w/360 gas motor that was converted to LPG along time ago. Use to start fine always. Last couple years--will crank & start great cold, but after ran for 15-20 minutes, & its warm, it still cranks great but will not start if cranked, bu...
|2002 Dodge Ram 3500 Truck 5.9L Abs Light VIN: 2B5WB35Z42
Keeps setting code 63 , checked wiring all tested ok, replaced abs module with oem module still comes on and off, all brakes are new, it is my church van and we want it safe thanks ahead for any help
Fixes & Summaries for Chrysler
|2007 Chrysler Pacifica Touring 4.0L Engine VIN: 2A8GM68X57
IT WAS THE TIMING BELT, THE CUSTOMER HAD PUT RADIATOR SEALER IN THE COOLENT FOR A LEAK HE COULD NOT FIND. IT HAD CONGEALED AT THE WATER PUMP WEEP HOLE AND THERE WAS SO MUCH OF IT THAT IT HAD GOT INTO THE COGGS OF THE TIMING BELT AT THE CRANK PULLEY CAUSING IT ...
|1982 Dodge Ramcharger 5.2L No Start VIN: 1B4GW12P2C
Thank you all for your replies. after checking for proper grounds ( Volt drop )and power to coil , I removed the Dist cap to find the breaker plate the Hall Effect switch is mounted on was broken loose from the base and floating around. This is a single pick-u...
|1997 Dodge B2500 3.9L Hesitation, Stall, MIL Lamp on VIN: 2B6HB21X7V
Thank you to all for your replies.After talking to customer about aftermarket parts we both came to conclusion and replaced crankshaft sensor with mopar one .They have driven van for week and and no problems. Trouble codes: P0351, P0301, P0303, P0305, P0300.