|Prev||Professional Automotive Repair Technical Discussions for April 29, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|2004 Land Rover Range Rover HSE 4.4L transmission fail codes VIN: SALME11484
thanks to all for the help
Fixes & Summaries for European
|1999 BMW 323i 2.5L no crank VIN: WBAAM3332X
customer brought in another key at which point the cranked, not start. we reinstalled the old EWS module and realign to DME, the vehicle started and also got a new master key.
|1988 Jaguar XJS C 5.3L Excessive Emissions, No Start, Poor Idle Quality, Cuts out, Misfire, Poor Fuel Economy VIN: SAJNA5846J
Bob and Darryl were the only 2 of 7 replies that were on target. I don't think the others bothered to read the post! The car is still with me and I have confirmed that the A Bank transistor failed and that the zener diodes on the board were burned. I solde...
|2002 Volkswagen Passat GLX 2.8L Starting VIN: WVWWH63B72
Unfortunately I cannot call this a fix because all I really did was install a new fuse. What I do know now from the replies I received is that even though this fuse has only two branches, one that feeds the comfort control module and one that feeds the fuel d...
|2005 Volkswagen Jetta 2.5 2.5L Hesitation, Cuts out VIN: 3VWDF71K95
Well, as we started looking a the circuit to the throttle body we found that the 10 amp fuse in the underhood fuse panel was completely missing. Installed the fuse and the throttle adapted with no issues and the vehicle is running perfectly. Thanks
|2000 Volvo S40 1.9L Poor Idle Quality, Stall VIN: YV1VS2556Y
this volvo is fixed. after checking and double checking everything we started zoning in on the accessories driven by the serp belt. we unplugged the alternator and the problem went away. we removed alternator and found the clutch was frozen. we didn't have an... Trouble codes: P1014 (VVT reset valve).