Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for April 25, 2012
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1996 Dodge Ram 2500 Truck 5.9L fuse box VIN: 3B7KF23C7T
engine fuse #9 fuse keeps blowing intermittantly. Customer states that when he was off loading his boat, engine died and he found fuse 9 blown. replaced fuse, truck ran for a week or two then bloew fuse agian. He repeated this process for the next few months r...
1998 Dodge Dakota 3.9L Cuts out, Stall VIN: 1B7GL22X3W
Thanks for taking the time to read this post. This truck came in to have an intermittent stalling problem diagnosed. The customer states that it dies randomly under all conditions. I havent been able to get it to die while driving it but I have been able to ge... Trouble codes: P0351
2002 Dodge Ram 1500 Truck 5.9L security VIN: 1D7HU18Z42
see abouve
2002 Dodge Ram 1500 Truck 4.7L Misfire, MIL Lamp on VIN: 3B7HU18N32
Hi everyone, I have this Dodge truck that came in about 4 months ago with SES on, Had P0302 then, pulled plug and tested coil at that time, both ok, checked fuel pressure, ok, cleared code and let customer have back to see if it would come back right away, did... Trouble codes: P0302 (Cylinder 2 missfire)
2005 Dodge Ram 3500 Truck SLT 5.9L No Start VIN: 3D7MS48C35
Hey guys, I need your opinion. I got this 05 Ram with a 5.9 Cummins that came in on the hook for a crank no start. Basic testing revealed no fuel getting to CP3 pump. Current dtc P0628 lift pump circuit low voltage. At the lift pump relay, when jumped the pump... Trouble codes: P0628 (Lift pump circuit low voltage)
2001 Jeep Grand Cherokee Laredo 4.0L gauges VIN: 1J4GW48S71
Gauges in cluster don't work. Idiot lights and all other systems work normal on car. All fuses good. Solus not able to operate gauges on Jeep. That is to say that there isn,t software in the tool for testing. Customer tried substituing BCM,Cluster,and replaced...

Fixes & Summaries for Chrysler
Fix/Summary Answers
2003 Chrysler PT Cruiser Limited 2.4L won't stay engaged VIN: 3C8FY68B23
there were seven replies and most asked about the brake switch or the clockspring. One asked me to monitor thr the vehicle speed sensor and one said to change the cruise control switch. I checked all of these replies and came up with nothing, although they w...
2001 Dodge Dakota 3.9L 4wd VIN: 1B7GG26X71
Thank you for your suggestions. Turns out the new module was not a working part. Although it did actually wake up and work once or twice. We took the vehicle to a freind who just got a new Snap On Scan tool with all the bells and whisles and was able to comun...
2002 Dodge Intrepid SE 2.7L Block VIN: 2B3HD46R32
Thanks to those who responded. This was a strange one. It turns out the engine block, which apparently was remanufactured, had been re-machined at the water pump mount area, and in doing so created space around the water pump drain holes with a short channel l...
2004 Dodge Ram 2500 Truck ST 5.9L Unknown VIN: 3D7KA28C64
Thanks to all that replied, the noise as some suggested sounds like it is coming from the high pressure pump, truck runs well so we will not be doing any repairs at this time.
2005 Dodge Dakota SLT 4.7L Transfer case motor VIN: 1D7HW48N25
Thanks For all the advise. I replaced the transmission select motor with a remanufactured assembly, car has been gone for a week now with no complaints. consider this one fixed
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next