
![]() |
Professional Automotive Repair Technical Discussions for April 22, 2012 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for Asian
Help Request | Answers | |
1990 Nissan Stanza XE 2.4L No Start VIN: JN1F421P8L I'm still scratching my head on this one. I just install a used engine in the car due to very low compression on the original engine. It cranks great has good spark , good injector pulse signal, good fuel pressure but it won't start. If I use carb spray starts... |
View | |
1997 Subaru Legacy Outback 2.5L Cooling system After above repairs noted that the cooling system filled extremely slow. Tried jacking up the front end, no change. Tried opening bleeder valve on pass side of radiator and no change. I filled it up and ran the engine, the level didnt seem to drop so I though ... |
View |
Fixes & Summaries for Asian
Fix/Summary | Answers | |
2001 Acura CL Premium 3.2L Misfire VIN: 19UYA42401 Thanks for your help the fix was replacing all spark plug with OEM parts and road test all ok at this time . The car was tund by custmer frand and mile 161000k Trouble codes: P0301, P0302, P0303, P0304, P0305, P0306. |
18 | |
2003 Honda Accord LX 2.4L No Start, MIL Lamp on, will start when jump VIN: 1HGCM56313 Vehicle is fixed. first I discovered that Bat+ & Bat- Terminals where corroded on the inside of insulating sheath. I replaced them both and cleaned all connection points. I thought issue was resovled. No change. Checked for parasitic draw; Vehicle had a large ... Trouble codes: P0606 (PCM Proccessor Fault). |
16 | |
2003 Lexus ES300 3.0L Surge VIN: JTHBF30G03 I checked the various other items suggested but found nothing other than the MAF readings slightly higher than normal. Car finally came back to the shop over the weekend with a check engine light on now, found the B1S1 O2 sensor stuck reading lean, but it woul... |
10 |