|Prev||Professional Automotive Repair Technical Discussions for March 31, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|2006 Mercedes-Benz C280 4Matic 3.0L brake light switch VIN: WMEAJ0036J
This is a smart car .8 liter diesel.IATN does not give me the option to enter this make of vehicle.My problem is I am replacing the brake light switch and a new updated wiring harness.Mercedes is not giving me any info on how to wire the new harness.The new ha...
|1999 Volkswagen Passat GLS 1.8L Timing Belt VIN: WVWMA63B5X
Just replaced the timing belt on this 1.8 along with the hydraulic tensioner, tensioner pulley and roller. Alldata not very clear on the tensioning procedure. Used 8mm allen to turn tensioner pulley counterclockwise until I could pull the pin out of the hydrau...
|2000 Volkswagen Jetta GLX 2.8L slipping when hot VIN: 3VWTE29MXY
hello techs shop owner brought me a bench job 01m trans. found the 1-3 and the 4th clutches were welded together and the 4th piston seal was completely melted off. rebuilt trans with new pistons, steels and transgo kit. gave it back to the shop. said it got t...
|2000 Volkswagen Beetle GLS 2.0L no speedometer VIN: 3VWCA21C9Y
hello, Im not to familar with vw transmission/differental, need help on how to change the plastic speedo gear in the differental,(not the sensor), can it b done without special tool? Need to help on how to remove the taperd rooler bearing.
Fixes & Summaries for European