Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for February 19, 2012
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Asian
Help Request Answers
1996 Nissan Maxima GLE 3.0L Cuts out, Stall VIN: JN1CA21D9T
disconnected evap purge control valve stepper motor hoses to intake. disconnected egr vacuum hose. checked throttle plate ok. engine will boug down to 250- 650 rpm when coming to a stop. it will pick up if i accelerate or it will turn back on if it stalls. doe... Trouble codes: P1445
View

Fixes & Summaries for Asian
Fix/Summary Answers
2005 Acura EL 1.7L MIL Lamp on VIN: 2HHES358X5
The first thing I did was used a local exhaust shop that has proven the cats work they install them for the dealers,think longevity will suffer! Two new NTK sensors were installed both had same failure p0139.Then I tried a Bosh sensor,and no MIl!! Chris from U... Trouble codes: P0139 (Hego sensor B1 sensor 2).
19
2005 Honda Odyssey EX 3.5L Mechanical VIN: 5FNRL38625
A big thank-you to James [...] for providing the honda part numbers. They are also available aftermarket from Dayco, It's a shame when Honda part guy can't get it rite with vin number. Has anybody else noticed parts problems increasing since they did away with b...
6
2001 Nissan Altima GXE 2.4L MIL Lamp on VIN: 1N4DL01D91
The ECM failed to activate the vent solenoid when commanded ,replaced ECM and all is well. Thanks everyone. Trouble codes: P1448.
4
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next