Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for February 17, 2012
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
1979 Ford F-350 Ranger 7.5L wiper motor VIN: X35JKEE310
Hello there I have this old pick-up here and the cust said the wiper motor stopped working. He brought the truck and a new wiper motor to me and asked for me to put it in. I did and made sure I marked the wires in the connector to make sure they go back in the...
View
2001 Ford Escape XLS 2.0L Shifting VIN: 1FMYU02B71
Transmission will not shift into 2nd gear or reverse intermittently. After shifting through other gears, 2nd and/or reverse can be shifted into. Problem occurs with or without engine running. Problem occurs with clutch engaged or disengaged. Holding the clutch...
View
2002 Ford Windstar SE 3.8L oil in coolant jug VIN: 2FMZA524X2
we have cleaned and flushed coolant system 3 times and oil keeps coming back in overflow jug
View
2002 Ford Ranger Edge 4.0L starter VIN: 1FTZR45E32
Hopefully this will be good for a laugh. I checked the archives and found no similar problem. The vehicle came in with a locked up engine about 2 months ago. We were able to get the engine freed up and then started. It ran long enough for us to determine that ...
View
2003 Ford Windstar 3.8L alternator VIN: 2FTZA54453
thanks in advance... this veh came into shop no charge.. alternator no output.. we replaced battery and alt with reman unit.. veh towed back in with alt light on.. we replaced alt again with new motorcraft unit... veh has come back in multiple times with same ...
View
2000 Mercury Grand Marquis LS 4.6L Poor Idle Quality, Hesitation, Misfire VIN: 2MEFM75W4Y
customer came in with check engine light on. scanned and found cyl 4 misfire. pulled the plug and saw the plugs were brand new, i swapped the plug, and coil from cyl.4 to 3 and cleared the code, drove it and again detectected a misfire. checked again and it wa... Trouble codes: 304 (cyl 4 misfire)
View

Fixes & Summaries for Ford
Fix/Summary Answers
2000 Ford Ranger XL 4.0L head gaskets VIN: 1FTYR14X3Y
Thanks for replies had crack in head at cylinder 5 area but was affecting cylinder 6 some travel eh?
14
2008 Ford Crown Victoria Police Interceptor 4.6L MIL Lamp on VIN: 2FAHP71V18
HI ALL, THANKS FOR YOUR REPLIES, I FOUND SOME SMASHED WIRES WHERE THEY CROSS OVER TRANS TO O2 SENSORS.HARD TO SEE, HAD TO PULL LOOM UP FROM TRANS TO ENGINE TO SEE IT. PROBABLY HAPPENED WHEN TRANS WAS INSTALLED, DONT KNOW. WIRES OHMED GOOD BUT MUST HAVE RUBBED ... Trouble codes: P0135 (B1s1 heater), P0141 (B1s2 heater), P0155 (B2s1 heater), P0161 (B2s2 heater), P0403 (Egr control), P0443 (Evap purge control).
10
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next