
![]() |
Professional Automotive Repair Technical Discussions for February 4, 2012 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for Chrysler
Help Request | Answers | |
2005 Dodge Magnum SXT 3.5L oxygen sensor VIN: 2D8FV48V35 I have tested this circuit (DVOM) for voltage to the heater circuit (br/gy wire)on right rear oxygen sensor. Reference (br) seems fine, ground for heater (bk/lb) is fine, o2 return (db/dg) seems fine. The wiring schematic I have shows the heater voltage coming... |
View | |
2006 Dodge Magnum SE 2.7L timing VIN: 2D4FV47T56 Hello and tank you in advance any help you can provide, custormer car came in for oil light on, remove oil pand and oil pick up tube was cloge. Removed valve cover to inspect and found engine with excesive sluch, clean all pasages and replace all related parts... |
View |
Fixes & Summaries for Chrysler
Fix/Summary | Answers | |
1993 Dodge Stealth R/T 3.0L Unknown well the fix for the cruise was the on off switch on the console, i could hold it down in the on position and the cruise would work. to check the codes in the suspension requires a volt meter with a needle, hook it up to the right pins in the dlc connecter an... |
10 | |
2000 Dodge Neon ES 2.0L Misfire, MIL Lamp on VIN: 1B3ES46C6Y Thanks to everyone for all the help. I did the rewire first trying to go with the code I was getting. No matter what I did I could not fix that code. I decided to go by symptom and go with what I would do do I replaced the crank sensor and boom no more pobl... Trouble codes: P0351 (Inition primary coil circuit A fault). |
35 | |
2008 Dodge Grand Caravan SXT 4.0L wipers gauges headlights VIN: 2D8HN54X48 Well, it seems as though we were not able to fix this one. I spent numerous hours removing all of the interior and tracing all bus wiring throughout looking for the phantom problem. After 3 weeks (on and off) working on this beast the customer decided that h... |
14 |