|Prev||Professional Automotive Repair Technical Discussions for January 15, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
Fixes & Summaries for Ford
|1991 Ford E-350 Econoline Club Wagon XL 5.8L King pins VIN: 1FBJS31H1M
Thanks everybody for you input. I know the bearings go on the bottom to carry the load. Just thought i would check first before reassembly tomorrow. I did not measure the ride heigth before tear down. Will measure after it back together. Its seems that it woul...
|2003 Ford Explorer XLT 4.0L exterior lighting VIN: 1FMZU73E43
My customer finally returned with the Explorer yesterday. Ireplaced DIXIE alternator with a WILSON reman unit and now the headlights are steady,even when cold, So after replacing DRL module and then the alternator, all is good & my customer is happy. I want to...
|2004 Ford F-150 Lariat 5.4L Poor Idle Quality, MIL Lamp on
As most of you mentioned the problem was the vacuum elbow on the bottom rear of the intake manifold. I suspected a vacuum leak all along but couldn't find it, that thing isnt very easy to get to! Thanks everyone for your time. Trouble codes: P0171 (Bank 1 Lean), P0174 (Bank 2 Lean), P2195 (O2 Stuck Lean), P2197 (O2 Stuck Lean).
|2004 Ford F-250 Super Duty Lariat 6.0L oss VIN: 1FTNW21PX4
Alright guys I appreciated the input you a have sent. I made the mistake of performing the action a lot of you recommended all at the same time. Good news is it fixed the problem. Bad news is I cant pinpoint which action corrected the trouble. I feel pretty st...