|Prev||Professional Automotive Repair Technical Discussions for January 7, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1991 Ford Explorer Eddie Bauer 4.0L Cuts out VIN: 1FMDU34X4M
Greetings and a happy New Year to all my fellow techs out in iATN land. First let me apologize for the length of this post. This truck is to be my 19 year old son's hunting rig and we've already rebuilt the motor and trans. I work mostly on Audi/VWs so I need ... Trouble codes: 14 (PIP circuit failure continuous memory), 22 (MAP or BARO sensor out of range continuous memory)
|2000 Ford Focus ZX3 2.0L Hesitation, no power VIN: 3FAFP3139Y
This Focus came to me with a "no power" complaint. If you try to rev up the engine, it takes forever to build up rpms, but once it gets over 2000 rpm it runs great. Inspection of the vehicle revealed melted wiring near the exhaust indicating that the catalyst ...
|2001 Ford Explorer XLT 4.0L Starting VIN: 1FMZU73E11
truck was towed to our shop after it died at customers house.tech checked and found good spark but only 25 psi fuel pressure.spec is 60-65 psi.replaced pump,strainer and filter and now have 63 psi.magic! not so. still no start and now tech notices theft light ...
|2003 Ford F-250 Super Duty XLT 6.0L egr system VIN: 1FTNF20P03
This truck comes into our shop often with different problems usually but one code keeps returning.PO 401 EGR flow. We replaced the EGR valve, Cleaned the intake manifold,replaced the EGR cooler,and after about one week the code returns.Any Ideas?
Fixes & Summaries for Ford
|2005 Ford F-250 Super Duty King Ranch 6.0L engine VIN: 1FTSW21PX5
Hi Guys, Thanks for all the help-- I had a good Turbo on the shelf so we installed it just to try it and that solved it--Thanks again
|2006 Ford F-350 Super Duty XLT 6.0L Alternator VIN: 1FTWW33P86
During the process of rechecking this system, the new Ultima starter I installed started working within an acceptable range. It ended up with a Max amperage of 60 with every load on. Amps dropped to around 40 @ idle with a voltage of 14.2. A few of the replies...
|2008 Ford Expedition XLT 5.4L stabilitrac VIN: 1FMFU16518
well i removed the center console and found liquid spilled on the stability control module it has the yaw sensor in it replaced and it is now fixed