|Prev||Professional Automotive Repair Technical Discussions for December 27, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1999 Dodge Grand Caravan SE 3.3L Unknown VIN: 2B4GP44R9X
Can't put into drive car stalls, most times, I unplugged the TCM it goes into drive and reverse no stalling. scan data for TRS looks good, ohm test for the input and output speed sensors one at 692 ohms the other is 815 ohms, pins # 14 and 52 the 2-4 soleno...
Fixes & Summaries for Chrysler
|2002 Chrysler Town & Country (Van) EX 3.8L Poor Idle Quality, Surge, MIL Lamp on VIN: 2C8GP74L92
First, thanks to everyone who took the time to read and reply to my help request. Most all ideas pointed to the tps sensor or a wiring problem. All numbers that I got off the tps looked good but I replaced it anyway as a shot. No difference. Next I pulled back... Trouble codes: P1294 (desired min rpm not reached).
|2001 Dodge Ram 2500 Truck 8.0L front axle assy VIN: 3B7KF23W71
Well, I'm not done with the repair yet, but it's underway. There should've been another zero in that milage, 180,000 miles. I got back under it, and one of the new hub assy's had failed. But that didn't explain the debris in the oil so I pulled the axles and t...
|2000 Jeep Grand Cherokee Laredo 4.0L Ecm/Bcm VIN: 1J4G248S9Y
i just want to thank everyone who replied.we replaced the pcm with a used unit+had it programed with drb.then had to replace alternator because of blown diodes.have put 50 miles on vehicle so far so good. thanks to all+happy new year!!!