|Prev||Professional Automotive Repair Technical Discussions for December 23, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1997 Chrysler Sebring LXi 2.5L spark VIN: 4C3AU52N0V
replace distributor,check ohms from PCM everything \checked out good, have injectors, checked grounds
|2001 Dodge Caravan SE 3.3L Output speed VIN: 1B4GP25361
This Caravan came to me stuck in limp mode. I scanned it for codes and found gear ratio codes and output speed sensor code. I found that the output speed would read RPM sitting still. So far, I have replaced the input and output speed sensors. I also ran seper...
|2001 Dodge Ram 2500 Truck 8.0L front axle assy VIN: 3B7KF23W71
There is a grinding, howling kind of noise from the front axle assy. The new wheel bearings turn smooth, I've pulled the front cover, and it was low on oil, and there was metal in the oil, but the gears and bearings seem to be ok. this noise gets much quiter i...
|2005 Dodge Grand Caravan SE 3.3L abs VIN: 2D4GP24R95
Vehicle has an ABS light on at all times displays codes 11 and 13. We have no signal from either front wheel speed sensor. Following the test proceedure we should have battery voltage to each sensor, we have 11.6 volts to the left sensor and only 5.7 to the ri...
Fixes & Summaries for Chrysler