|Prev||Professional Automotive Repair Technical Discussions for December 11, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2001 Chrysler Concorde LXi 3.2L long start VIN: 2C3HD36J61
After sitting takes 3 turns of key to fire. If driven and hot will start right back up.
|2003 Dodge Ram 1500 Truck 5.9L Cuts out, Stall VIN: 1D7HU18Z23
driving normal conditions all gauges go to off position,engine will go dead silent.lasts for a second or two then gauges come back to normal and engine sounds normal again.never sets codes,sometimes will stall completely and restart when keyed.new pcm and it d...
|2005 Dodge Grand Caravan SE 3.3L blower motor VIN: 2D4GP24RX5
how do you get to the front lower screw on the motor cover. does the actuator door in the cover fall apart when cover removed. i have 3 screws out of 4 and one on top removed but the front lower over the wheel well that holds the motor cover on is to where i c...
|2006 Dodge Ram 1500 Truck ST 4.7L Oil Pressure VIN: 1D7HU18NX6
Truck came in with a blown Head gasket, we replace Head Gaskets and Head Gaskets and head bolts, started engine and ran OK. Once it got hot we lost oil pressure at idle. We did a manual pressure test and found it to be good off idle 45-60 psi hot but at idle i...
Fixes & Summaries for Chrysler
|2004 Chrysler Pacifica 3.5L cruise control VIN: 2C8GF68484
thanks for all the help, turns out it was a loose conection at the cruise control servo.
|1999 Dodge Ram 2500 Truck 5.9L sensor circuit VIN: 1B7KF2364X
It has come time to close this request,and the truck is not yet fixed. After the normal and recommended resources for a used controller failed,I left the hunting in the hands of the owner and his dad.I understand they have located one but have yet to get it to...