 Prev |
Professional Automotive Repair Technical Discussions for December 4, 2011 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 1998 Ford Ranger Splash 4.0L No Start VIN: 1FTZR15X7W I posted here a couple of months ago and determined that this Ranger died due to a bad battery, alternator, and ECM. When this first happened, I spent a week and a half diagnosing and checked grounds, and hot connections. Found no problems. New battery, rebuil... |
View | |
| 2004 Ford Explorer Limited 4.0L Steering/Suspension VIN: 1FMDU75E64 Car was towed in w/ a violent vibration complaint at highway speeds. Checked rotor temps, pushed in caliper pistons, checked caliper slides, front end, wheel balance and alignment. All Ok. Test drove car and was able to randomly duplicate problem. If I slightl... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2000 Ford Taurus SE 3.0L Cuts out VIN: 1FAFP58S7Y this one is fixed after repairing all of the other problems,along with the battery and noticing that on the right front tire it had a 215 inch tire and the left front it had a 205 tire and at the left rear was a 215 inch tire and the right rear had a 205,all o... Trouble codes: P0161, P0401, P0455, B. |
10 | |
| 2002 Ford Excursion XLT 5.4L Mechanical VIN: 1FMNU40L02 Thanks for all the replies. What I ended up doing was buying another repair line. I used a heat gun and the brass barb slid right onto the repair line. Sliding the barb onto the oem line was a different story. I had to keep heating it up and shoving and pushi... |
12 | |
| 2003 Ford E-450 Super Duty Custom 7.3L No Start, Stall VIN: 1FDXE45F63 Thanks to all who replied, customer wanted his truck back, he said he would keep it running most the time anyways. I did change to fuel filter and it was changed out recently, the screen was clean. The Oil level in the injection pump was 1/2" below the plug ho... |
10 |
