× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for November 23, 2011
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2003 Chrysler PT Cruiser Limited 2.4L MIL Lamp on VIN: 3C8FY68B73
The check engine light is on with code P0441: Incorrect Purge Flow. Using scanner in ATM mode to operate the purge solenoid, the scanner would only turn the solenoid ON or OFF. It would not cycle it ON and OFF. (It does cycle everything else.) The solenoid has... Trouble codes: P0441 (Evap Incorrect Purge Flow)
2004 Dodge Ram 2500 ST 5.9L Cuts out, Stall VIN: 3D7KU28C54
I'll start off by saying that I am not very experienced with Cummins diesels and my shop is not equipped for diesel repair. We got stuck with this because the bosses cousin just bought it and is having problems. It died going down the road, acted like it lost ... Trouble codes: P0483 (Cooling fan fault)
2006 Dodge Dakota SLT 3.7L Shift VIN: 1D7HE42K36
The truck will drive perfectly, but sometimes when you go over a rough road or maybe railroad tracks the transmission will go into limp mode and shift into what I believe is 2nd gear. There is no shifting, but if you shut the engine off and restart it the truc...
2005 Jeep Grand Cherokee Laredo 3.7L gas cap message VIN: 1J4GR48K55
unable to clear gas cap loose message in dic after replacing purge solennoid and clearing code p0455

Fixes & Summaries for Chrysler
Fix/Summary Answers
1997 Chrysler Town & Country LXi 3.8L Lighting VIN: 1C4GP64L4V
turned out to be the wiring harness rubbing on the trans causing the fuse to blow
1998 Chrysler Town & Country SX 3.8L Excessive Emissions, Poor Idle Quality, Cuts out, Stall, Misfire VIN: 1C4GP55L7W
we checked all the information we received to no avail so we took the car to a Chrysler dealer to get an estimate and they said 3600.00 (three thousand six humdred) dollars, so the customer refused because the car is worth about half that, so the next step w...
2003 Chrysler Town & Country EL 3.3L one time cut out VIN: 2C4GP24R73
Thanks for all the replies, I did find connector C4 of the IPM corroded, I replaced this connector and test drove vehicle again, while on this test drive I had my lab scope connected to power ground and data lines to the TCM, this time I lost all power to the ... Trouble codes: P0884.
1991 Dodge Dakota LE 5.2L Poor Idle Quality, Surge, Cuts out, Misfire VIN: 1B7G123Y5M
I checked the distributor positioning in relation to the wires on the cap and it seems fine. From there, they can haul it off to some other poor soul. I'm 53 Y.O., and life's too short to fight with this kind of wreck! Thank you all for your help.
1996 Dodge Ram 1500 5.9L Excessive Emissions VIN: 1B7HC16Z8T
I finally got this truck back in the shop today. If I'm reading the schematic right, I'm suppose to get a 5 volt signal from the Speed Sensor. ?? I have 5 volts going to the sensor but nothing coming out on the blk/blu wire that apparently feeds the o2 circui... Trouble codes: 171 (Lean).
1998 Jeep Wrangler Sport 4.0L No Start VIN: 1J4FY19S2W
We have not yet fixed this problem child and it just seems to get worse. We got another rebuilt pcm and it is worse than the one that we were fighting already. The harness off the pcm that goes to the cam,crank injectors o2's, fuel pump and some other things h...
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next