|Prev||Professional Automotive Repair Technical Discussions for November 21, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1992 Chrysler New Yorker Fifth Avenue 3.8L No Start VIN: 1C3XV66L8N
We have a chrysler that the alarm keeps shutting down the fuel.. The customer had this car at another shop for the no start and had replaced the pcm when we got it we replaced the map sensor because it was shutting the injectors off, but after that all we ever...
|2000 Chrysler Cirrus LX 2.4L Starting VIN: 1C3EJ46X7Y
Thanks in advance for any help,I need help with this one.I replaced the b.c.m. and every thing worked ok for a day came in the shop the next morning and went to start the car and the alarm went off,and I couldnt get it to stop tried to start the car and just c...
|1996 Dodge Ram 2500 Truck 8.0L Poor Idle Quality VIN: 1B7KF26W6T
This vehicle will start cold and idle just fine as it warms up it will occasionally have a cylinder miss that drops the rpms about 100 to 150 rpm only when the vehicle is in park or neutral. It does not miss in drive or reverse There are no codes stored, fuel ...
|1997 Jeep Wrangler Sahara 4.0L No Start, Poor Fuel Economy VIN: 1J4EY49S6V
hello all. I have a 97 jeep wrangler thats kicking me in the coin pouch. vehicle came from another repair shop on the hook. checked basics, noticed that fuel pump is staying on and no communication. checked for sticking relay all is well. pulled spark plugs of...
Fixes & Summaries for Chrysler
|2004 Chrysler Pacifica 3.5L Tpms VIN: 2C8GF68464
Turns out NAPA sent the wrong frequency sensors, replaced the sensors with the proper frequency and it learned all 4 sensors within 2 miles of driving. Thanks for all the help.
|2002 Dodge Ram 1500 Truck 3.7L Engine VIN: 1D7HA16K82
Thanks to all replies. I will admit that this was a first for me. Noise ended up being #5 cyl wrist pin. I've never heard a wrist pin sound like a tappet before but suppose that this is the new norm due to tighter tolerances. Repalced piston assy, reinstal...