|Prev||Professional Automotive Repair Technical Discussions for November 12, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2004 Chrysler Pacifica 3.5L windshield VIN: 2C8GF68464
Vehicle has a problem with fogging the windshield, even when its already cleared off, and the vehicle is warmed up. After you begin to drive, the windshield will fog pretty severely to the point that it needs to be toweled off. Problem is definately a lower am...
|1989 Dodge B250 5.2L Surge, Stall VIN: 2B6HB21Y2K
Hello all you guys. I have this van that is kicking my butt. the van runs very lean all the time, It came from an other shop. they changed a whole lot of parts, Map sensor, coolant temp sensor, fuel pressure reg, o2 sensor, I replace the fuel pump and spark pl...
|1997 Dodge Ram 1500 Truck 5.9L No Start, Cuts out VIN: 3B7HF13Z6V
Greetings. Problem started after truck sat a week at 20-50F. Seems to be cold related, the longer it is in the shop the less it does it. Heres what it is doing. After turning the key on the ASD and fuel pump relay chatter very quickly, very intermittently. Wh...
Fixes & Summaries for Chrysler
|2000 Dodge Stratus SE 2.4L heater core VIN: 1B3EJ46X1Y
Thank you to all those who offered advice. Nobody knew of a bleeder screw. Suggestions included using compressed air or a water hose to flush out the (possibly plugged) heater core, using a vacuum device to pull a vacuum on the cooling system and then adding...
|2001 Dodge Ram 2500 Truck 5.9L starter circuit VIN: 3B7KC26Z91
Customer agreed to replace starter so I put in a new one versus a reman. He declined to do the TSB update with the harness at this point that Thomas suggested. As of now the truck is continuing just fine. Thanks for all the suggestions.