× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for October 4, 2011
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
1989 Ford Ranger XLT 2.3L No Start VIN: 1FTCR10A5K
1 am about to let this truck go,most of the time does not starts,when does not start loses injection pulse,i have checked grounds, powers to the computer and i dont see a problem,check pip signal and it is fine, .5 to 10.5 volts square wave while cranking,it s...
2000 Ford E-150 Econoline 4.2L Hesitation, Cuts out, Stall, Poor Fuel Economy, Very little power VIN: 1FTRE1423Y
The vehicle originally came in running poorly and misfiring. We replaced the plugs, wires, and fuel filter. The misfire was fixed, however the vehicle still runs very poorly. At times (most often cold start) the vehicle will start and stall 2-3 times, then it ...
2004 Ford F-350 Super Duty XL 5.4L Misfire VIN: 1FDWF37J54
hi guys im stumped here this vehicle came in because the interior light would come on when you depressed the brake pedal. but it ran fine,i have removed the dash repaired all of the chewed wires and fixed the interior light problem.after i put the vehicle back...
1999 Mercury Mystique GS 2.0L Hesitation, Cuts out, MIL Lamp on, Low power on accel VIN: 1MEFM6530X
A customer had brought in a 1999 Mercury Mystique GS. It has the VCT DOHC 2.0L engine. The car came to us with the CEL on and a poor idle from a dead miss and lack of power on accel. We first checked the plugs, wires and coil output. Coil was not firing above ... Trouble codes: P0340 (Camshaft position sensor A circuit Bank 1 or signal sensor - Circuit malfunction)
1999 Mercury Sable GS 3.0L Hesitation, Cuts out, Stall VIN: 1MEFM53S4X
customer came in and complained about a lose of power while driving at around highway speeds, however it is only an intermitten problem. i did basic checks and found everything ok. i went for a long ride, stopped at the gas station shut the car off and it woul...

Fixes & Summaries for Ford
Fix/Summary Answers
1998 Ford Windstar 3.8L rack & pinion VIN: 2FMZA5146W
most of my replies indicated that reman parts are junk. I contacted tech support for both Cardone and Fenco, the 2 different brands I used and neither one seemed to have a clue. The lack of knowledge and available information has been unbelievable. Fortunately...
2004 Ford Freestar SE 3.9L Cuts out, Stall VIN: 2FMZA52274
Unable to duplicate no matter what I try. if I get it fixed will repost
2005 Ford Taurus SE 3.0L long cranks VIN: 1FAFP53U05
thanks for all the replies replaced iac with one from ford its been a few days customer came back this mornning and paid the bill he says car starts fine even after 48 hour soak thanks again
2004 Lincoln LS 3.0L Hesitation, Cuts out, Lacks power throttle VIN: 1LNHM86S14
Well I had already fixed this problem before I started this post but did not know it. After installing the throttle body, we only tried to rev engine up in the shop in Park and was scared to drive down the road. Just for grins & giggles, I pulled it out in the... Trouble codes: P0122 (Throttle/ Pedal position sensor A circuit low input), P0223 (Throttle/ Pedal position sensor B circuit high input), P2110 (Throttle Actuator control system forced limited RPM).
2006 Lincoln LS Sport 3.9L Power Windows VIN: 1LNFM87A26
Thanks to Robert, Shawn [...] Douglas for there replies. Shawn and Douglas sent us on the right track & Douglas with much detail. Mitchell doesnot mention removing power first prior to set procedures. Thanks again.
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next