|Prev||Professional Automotive Repair Technical Discussions for October 1, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1995 Dodge Ram 1500 Truck 5.9L Headlights VIN: 1B7HF16Z3S
Hey guys, I have this dodge ram 1500 in the shop with a headlight problem! My customer states that when he is driving down the road the headlights just shut off and then after about a several seconds the lights come back on. I've checked for bad grounds and co...
|2000 Dodge Ram 1500 Truck 3.9L All Gauges VIN: 1B7HC16X7Y
I have a no can bus on the instrument cluster after changing the evaporater . I dont think that i have shorted any wires , i get continuity through from all the wires need help i have to sell this vehicle.
|2001 Dodge Ram 1500 Truck 5.2L no overdrive VIN: 1B7HC16Y31
I am not a pro bulider but have done a little trans work here and there. This truck came in with a P1740 stored. I jumped the gun and put a torque converter in it as I had done a couple of these in the past that had had recent overhauls and problems with after...
|2003 Dodge Grand Caravan Sport 3.8L Stall VIN: 2D4GP44L03
customer brought van in 2 months ago complaining of eng. stalling mostly when coming to a stop i was able to duplicate problem, i checked for codes none were found i checked feul pressure and monitored all related pids nothing looked out of place so i cleaned ...
Fixes & Summaries for Chrysler
|1989 Chrysler New Yorker 3.0L Evaporator VIN: 1C3BC663XK
Thank you for the replies. Wrong, bad, incorrectly engineered parts again- I ended up replacing the unit with one that more closely matched original design, one that separates right after the h block to distribute refrigerant to multiple ares of the core at th...
|2003 Dodge Ram 1500 Truck 4.7L Stall VIN: 1D7HU18N13
After a couple of weeks of customer driving truck, I got it back to the shop and when I went to pull it in the shop, I got a big off idle hesitation. I was getting it in to lab scope the TPS as Dave & Kyle suggested and I set at idle and throttled it slowly an...