 Prev |
Professional Automotive Repair Technical Discussions for August 27, 2011 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2007 Chrysler Town & Country Touring 3.8L Surge VIN: 2A8GP54L67 Cannot figure this one out, it surges most at 26 to 32 MPH just under slight load, but at higher speeds you can feel it also. fuel pressure stays at 60 all the time, vacuum stays constant, smoke test found no vacuum leaks, inspected flexplate and found no visi... |
View | |
| 2007 Dodge Sprinter 2500 3.0L Hesitation, MIL Lamp on VIN: WDOPE84597 I have a shop delivery van that we just replaced the motor with a used engine that has less than 60,000 miles. The engine was replaced due to the driver installed gas in the old engine which it was a diesel and it snapped the camshaft. My problem is the truck ... Trouble codes: P2513 (Intake Port Swirl Actuator Positioner Error), P2025 (Intake Manifold Pressure Sensor Voltage Too Low or Load Pressure Too Low) |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 1998 Chrysler voyager 2.4L lockup VIN: 2P4FP25B5W information from iatn members was very helpful , I installed transmission cooler and that solved the problem . Thank you very much |
4 | |
| 2003 Dodge Ram 3500 Van 5.9L Starting VIN: 2D7LB31Z13 the problem was the alt.the customer had just brought this van and had no clue that it was the alternator. a company named penntex makes these thing and the one that was on it was for a basic van.den so so i called the company and they said that the alt was no... |
5 | |
| 2007 Dodge Sprinter 2500 3.0L MIL Lamp on, Turbo Cutout VIN: WD0PE74507 The consensus is that either there is a turbo and or EGR failure with this vehicle. Other replies indicated wiring issues. I checked the wiring and it seems OK. I replaced the turbo inlet pipe with the updated part with no improvement. I have observed that... Trouble codes: 2510 (Boost Pressure Regulator Control Positioner Error), 2511 (EGR Control Positioner Error). |
5 |
